TD-W8960N300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-66

¾IPSec Connection Name: Enter a name for your VPN.

¾Remote IPSec Gateway Address (IP or Domain Name): Enter the destination gateway IP address in the box which is the public WAN IP or Domain Name of the remote VPN server endpoint. (For example: Input 219.134.112.247 in Device1, Input 219.134.112.246 in Device 2)

¾Tunnel access from local IP addresses: Choose Subnet if you want the Whole LAN to join the VPN network, or else choose Single Address if you want single IP to join the VPN network.

¾IP Address for VPN: Enter the IP address of your LAN. (For example: Input 192.168.1.1 in Device1, Input 192.168.2.1 in Device2)

¾IP Subnetmask: Enter the Subnet mask of your LAN. ( For example: Input 255.255.255.0 in both Device1 and Device2)

¾Tunnel access from remote IP addresses: Choose Subnet if you want the Remote Whole LAN to join the VPN network, or else choose Single Address if you want single IP to join the VPN network.

¾IP Address for VPN: Enter the IP address of the Remote LAN. ( For example: Input 192.168.2.1 in Device1,Input 192.168.1.1 in Device2)

¾IP Subnetmask: Enter the subnetmask of the remote LAN. ( For example: Input 255.255.255.0 in both Device1 and Device2)

¾Key Exchange Method: Select Auto (IKE) or Manual.

¾Authentication Method: Select Pre-Shared Key (recommended) or Certificate (X.509).

65

Page 72
Image 72
TP-Link TD-W8960N manual ¾ IPSec Connection Name Enter a name for your VPN