Intel RES2SV240 J3, J4, J5, J6, Jumper Description, LSI*LSISAS2x24 24-PortSAS/SATA Expander Chip

Table 1. Jumper Description

s

Jumper	Description	Type		Comments
J1 - J6	Internal mini SAS Port		Connection to SAS/SATA devices:
	Connectors, Ports 0-3, 4-7, 8-		• J1 = SAS port (0-3)
	11,12-15,16-19 and 20-23
			• J2 = SAS port (4-7)
			• J3	= SAS port (8-11)
			• J4	= SAS port (12-15)
			• J5	= SAS port (16-20)
			• J6	= SAS port (20-23)
J7 - J8	Discrete Fault LED header	2x12 pin header	Connects to external, green or red LEDs that
			indicate drive faults, two 2x12 headers can support
			24 LEDs
J9	SGPIO connector	4-pin connector	SGPIO out-of-band enclosure management,
			specifically to be used for Intel® 6-drive hot-swap
			non-expander SATA/SAS backplane
J10	Power connector	RA 4-pin	12V power input from remote power supply
		connector

SFF8087 Internal	SFF8087 Internal	SFF8087 Internal	SFF8087 Internal	SFF8087 Internal	SFF8087 Internal
SAS/SATA	SAS/SATA	SAS/SATA	SAS/SATA	SAS/SATA	SAS/SATA
CONNECTOR	CONNECTOR	CONNECTOR	CONNECTOR	CONNECTOR	CONNECTOR
Ports 0-3	Ports 4-7	Ports 8-11	Ports 12-15	Ports 16-19	Ports 20-23

TX RX TX RX TX RX TX RX TX RX TX RX

LSI*LSISAS2x24 24-Port SAS/SATA Expander Chip

LOCAL BUS

GPIOs

FLASH

EEPROM

SGPIO

Connector

AF003494

Figure 6. Hardware Block Diagram

12 Intel® RAID Expander Card RES2SV240 Hardware User’s Guide