Pelco C2461M-A Install the Back BOX, Remove the Lower Dome, Attach Directly to a Wall/Ceiling

Page 5

INSTALL THE BACK BOX

REMOVE THE LOWER DOME

Loosen the tamper-resistant screws with the supplied 1/8-inch hollow screwdriver bit. Remove the lower dome and place it to the side.

INSTALL THE BACK BOX

The installation methods for the ICS150 back box include the following:

Attach Directly to a Wall/Ceiling

Attach to a 4S Deep Electrical Box

Install in a Ceiling Tile

Select the best method for your installation, and then refer to the following pages for instructions.

Attach Directly to a Wall/Ceiling

Refer to Figure 1 for the following steps.

1.

Cut a hole 3.5 inches (9 cm) in diameter in the ceiling or wall using the adapter plate as a

 

template.

 

 

 

2.

Connect the video cable.

 

 

3.

Connect the power wires.

 

 

 

 

 

 

 

 

 

 

Voltage

Red Wire

Black Wire

 

 

 

12 VDC

+

Ground

 

 

 

24 VAC

~

~

 

 

AC Operation Only – If you are wiring more than one Camclosure system to the same

 

transformer, connect one side of the transformer to the red wire on all units, and connect the

 

other side of the transformer to the black wire on all units. Failure to connect all of the units

 

the same way will cause the cameras to be out of phase with each other and may produce a

 

vertical roll when switching between cameras.

4.

Attach the back box to the wall/ceiling.

MOUNTING

HARDWARE

(NOT SUPPLIED)

WALL OR CEILING

BACK BOX

Figure 1. Installation Directly to Wall/Ceiling

C2461M-A (7/03)

5

Image 5
Contents In-Ceiling Mount INSTALLATION/OPERATIONContents Regulatory Notices Important Safeguards and WarningsWelcome Install the Back BOX Install the Back BOXRemove the Lower Dome Attach Directly to a Wall/CeilingAttach to a 4S Deep Electrical Box Installation to 4S Deep Electrical BoxPlate as a template Install in a Ceiling TileCheck Heater Jumper Install the Camera ModuleInstall and Position the Camera ZOOM/FOCUS Make Camera SettingsBLC Back Light Compensation Digital Slow Shutter DSSAGC Automatic Gain Control Varifocal Lens Auto Iris Level Adjustment Vertical Phase Adjustment 24 VAC Operation onlyHow to Adjust the Phase Control Dome and Trim Ring Installation Reinstall the Dome and Trim RingBackbox SpecificationsWarranty Warranty and Return InformationISO9001
Related manuals
Manual 16 pages 60.03 Kb

C2461M-A specifications

The Pelco C2461M-A is a high-performance camera designed for a variety of surveillance applications, offering outstanding features that make it a preferred choice among professionals in security and monitoring. This camera is known for its compact design, delivering excellent image quality and reliability, suitable for both indoor and outdoor settings.

One of the main features of the Pelco C2461M-A is its image sensor, which provides high-resolution video capabilities. The camera supports up to 1080p HD resolution, ensuring crisp and clear images even in low-light conditions. This is achieved through advanced digital signal processing, which enhances image clarity and reduces noise, a crucial factor for effective surveillance.

The C2461M-A is equipped with a powerful infrared (IR) LED illumination system, allowing it to capture clear images even in complete darkness. The IR range can extend up to 30 meters, making it ideal for monitoring large areas without the need for additional lighting. This feature is particularly beneficial for nighttime surveillance, ensuring that critical details remain visible regardless of the ambient lighting conditions.

Another significant aspect of the Pelco C2461M-A is its robust construction. The camera is designed to withstand harsh environmental conditions, with an IP66 rating for water and dust resistance. This makes it suitable for outdoor deployment in various weather conditions, providing durability and longevity in the field.

In terms of connectivity, the C2461M-A supports various protocols such as ONVIF, enabling seamless integration with different video management systems. This compatibility allows for easy setup and integration into existing security infrastructures, enhancing the flexibility and usability of the system.

Additionally, the camera features advanced analytics capabilities, including motion detection and tampering alerts. These features enhance situational awareness and ensure that users are promptly alerted to any suspicious activities, improving the overall effectiveness of surveillance operations.

Overall, the Pelco C2461M-A stands out in the crowded surveillance market due to its impressive features, including high-resolution image capture, excellent low-light performance, robust construction, and compatibility with various systems and protocols. It is an ideal choice for those looking to enhance their security measures with a reliable and efficient surveillance solution.