Pelco C1987M manual Specifications, General

SPECIFICATIONS

GENERAL
CCD Sensor:	1/3-inch
Synchronization System:	AC line lock or internal oscillator
Horizontal Resolution:	380 TV lines
Iris Control:	Electronic/passive
Minimum Illumination:	0.08 lux @ 50 IRE, f1.2
Signal-to-Noise Ratio:	52 dB (AGC Off)
Gain Control:	Automatic
Vertical Phase:	Adjustable 0° ±120°
Automatic Gain Control:	Selectable by DIP switch setting
Backlight Compensation:	Selectable by DIP switch setting
Scanning System:	525 lines, 2:1 interlace
Auto Iris Lens Type:	DC/video control
Video Output:	1 Vp-p, 75 ohms
Iris Control Range:	1/60-1/100,000 second
ELECTRICAL
Power Requirements:	11-40 VDC or 14-30 VAC
Power Connector:	2-pin terminal strip, push-in type
Video Connector:	BNC
Lens Jack:	4-pin connector (miniature square)
Power Consumption:	Less than 4 watts
MECHANICAL
Lens Mount:	C/CS mount (adjustable)
Camera Mount:	Use 1/4-20 screw, top or bottom of camera housing
ENVIRONMENTAL
Operating Temperature:	14° to 122°F (-10°to 50°C)
Storage Temperature:	14° to 158°F (-10°to 70°C)
PHYSICAL
Physical Dimensions:	2.48 (W) x 2.67 (H) x 4.33 (D) inches (6.3 x 6.8 x 11 cm)
Weight (without lens):	0.77 lb (0.35 kg)

(Design and product specifications subject to change without notice.)

Pelco Manual C1987M (6/02) [ 15 ]