Pelco C1987M manual Important Safeguards and Warnings, Regulatory Notices

Page 4

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Installation and servicing should be done only by qualified service and installation personnel.

2.Installation shall be done in accordance with all local and national electrical and mechanical codes utilizing only approved materials.

3.Use only installation methods and materials capable of supporting four times the maximum specified load.

4.Use only UL listed class 2 power supply.

5.To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

DD/AI Lens Connector

The maximum load for a direct drive lens must not exceed 25 mA.

The maximum load for an auto-iris lens must not exceed 50 mA.

REGULATORY NOTICES

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device many not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

[ 4 ] Pelco Manual C1987M (6/02)

Image 4
Contents Installation/Operation Pelco Manual C1987M 6/02 List of Illustrations ContentsList of Tables Important Safeguards and Warnings Regulatory NoticesDescription ModelsInstallation Camera LayoutCamera Mounting Power and Video Connections 12 VDC2880 Wire Gauge TotalCable Type Maximum Distance Lens Setup and Focus Procedures Back Focus Adjustment Back Focus AdjustmentSwitch Settings LL/INT Synchronization Selection Switch SettingLens Mode Selector AIV/AID Switch Switch Setting Sharpness Normal/Sharpness Sharp Switch SettingBLC Backlight Compensation Switch Settings 2 BLC Setup SwitchesCamera Synchronization Specifications GeneralWarranty and Return Information Warranty

C1987M specifications

The Pelco C1987M is a robust and versatile camera known for its exceptional performance in surveillance applications. Designed for demanding environments, this camera incorporates advanced technologies to deliver high-quality video surveillance.

One of the standout features of the C1987M is its high-resolution imaging capability. Equipped with a powerful sensor, it captures clear and detailed images, ensuring that every crucial moment is recorded with precision. The camera's resolution allows for effective monitoring in both well-lit and low-light conditions, making it suitable for a variety of settings from retail spaces to critical infrastructure.

Another significant characteristic of the Pelco C1987M is its durable construction. Built to withstand the rigors of outdoor environments, it is weather-resistant and features a sturdy housing that protects the camera from moisture, dust, and extreme temperatures. This makes it an ideal choice for both indoor and outdoor surveillance where reliability is paramount.

The C1987M also integrates advanced video compression technologies, which help optimize storage and bandwidth requirements. By utilizing H.264 compression, the camera ensures that high-quality video footage can be stored efficiently without compromising detail. This technology is particularly beneficial for facilities with extensive surveillance needs, allowing for longer retention periods of recorded video.

With a focus on flexibility, the Pelco C1987M supports various mounting options, enabling easy installation in diverse locations. Additionally, it features a range of configurable settings, allowing users to tailor the camera's performance according to specific surveillance needs. Its adjustable frame rates and resolutions further provide users with the flexibility to balance quality and performance based on their operational requirements.

The camera is also compatible with various networking protocols, ensuring seamless integration into existing security systems. This interoperability facilitates easy management and monitoring, making it a convenient choice for security personnel who require efficient surveillance solutions.

In summary, the Pelco C1987M combines high-resolution imaging, durable design, advanced compression technologies, and flexible installation options. Its comprehensive feature set makes it a reliable choice for those seeking effective surveillance solutions in various environments. With its commitment to quality and innovation, Pelco continues to be a leader in the security camera industry, and the C1987M is a testament to that legacy.