Pelco C1306M-D (7/09) manual Install the Enclosure and Set Pan Position

Page 15

Install the Enclosure and Set Pan Position

1. Check for proper seating of the power module seal. Make sure the seal is fully seated in the groove on the top of the power module.

POWER MODULE SEAL

POWER MODULE

Figure 9. Factory-Installed Power Module Seal

WARNING: Use caution when attaching the enclosure unit to the power module. If the grooves on the top of the power module are damaged, the integrity of the unit could be compromised.

2.Refer to Figure 10 and attach the enclosure unit to the power module. Align the pins of the enclosure unit with the holes of the power module. Carefully mate the enclosure connector to the power module connector.

LOCKING

PIN

RING

 

HOLE

Figure 10. Attach the Enclosure Unit to the Power Module

WARNINGS:

•Total weight of the enclosure component is 34.7 lb (15.71 kg). Use caution when lifting and assembling the pan and tilt component on the power module.

•The weight of the enclosure unit must be safely supported during installation.

•It is recommended that non-slip gloves be worn during installation.

•Avoid thread damage. Never use force when assembling and tightening the threaded components of the system.

3.Turn the body of the enclosure to the left or right to set the pan position of the unit.

WARNING: Do not turn the body of the enclosure more than 200° in either direction or damage to the internal power module cable may occur.

4.With your hands carefully thread the enclosure’s locking ring on the threads of the power module until the threads are completely engaged.

5.Use the supplied spanner wrench to tighten the locking ring and fix the position of the enclosure. After the locking ring has been tightened, tap the end of the handle of the wrench with a hammer or the palm of your hand to ensure a secure fit. Make sure that the pan position is maintained when tightening the locking ring. Tighten the set screw of the locking ring with the supplied 2 mm Allen wrench to secure the locking ring.

C1306M-D (7/09)

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents ExSite Ehxm Series Explosionproof Fixed System Contents List of IllustrationsList of Tables Important Safety Instructions Getting Started Methods of InstallationAttach Power Module to Mounting Surface Install the Power ModuleConfiguration of Wire Harness Connect WiringProtocol Settings DIP Switch SettingsOn next Address SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 239 Remove Back Cap of Camera Enclosure Install the Camera ModuleInstall Camera Module SET TAB Center Position Factory-Installed Power Module Seal Install the Enclosure and Set Pan PositionSet the Tilt Angle of the Camera Module Install the Sun Shroud Install the Sun ShroudCamera Module Replacement MaintenanceInstall Camera Module C1306M-D 7/09 Electrical SpecificationsCamera Day/Night 23X Color LowLight 22X Color CAMERA/OPTICSProduct Warranty and Return Information

C1306M-D (7/09) specifications

The Pelco C1306M-D is a performance-driven camera designed for comprehensive surveillance applications, notable for its robust features and reliability. Launched in July 2009, the C1306M-D has been a popular choice in the security industry, primarily due to its technological advancements and user-friendly operation.

One of the key features of the C1306M-D is its advanced image sensor. The camera utilizes a high-resolution CCD sensor that delivers exceptional image quality, ensuring that users capture detailed and vibrant images even in challenging lighting conditions. Coupled with its adaptive signal processing technology, the camera enhances illumination levels, which significantly improves visibility in low-light environments.

A vital characteristic of the C1306M-D is its versatile lens options. The camera supports various lenses, allowing users to tailor their surveillance systems according to specific monitoring needs. Whether it’s for wide-area surveillance or detailed examination of specific locations, the interchangeable lens feature offers flexibility and adaptability.

In terms of construction, the Pelco C1306M-D is built with robust materials that ensure durability. Its weather-resistant housing makes it ideal for both indoor and outdoor installations, capable of withstanding harsh environmental conditions. This durability extends the camera’s lifespan, making it an excellent long-term investment for security operations.

The C1306M-D is equipped with advanced connectivity options, facilitating seamless integration into existing security systems. Its compatibility with various video formats and protocols enables easy integration with digital video recorders (DVRs) and network video recorders (NVRs). Additionally, the camera supports remote viewing capabilities, allowing users to monitor feeds in real time from anywhere through an internet connection.

Another noteworthy technology in the Pelco C1306M-D is its motion detection feature, which triggers alerts or recording when movement is detected within the camera’s field of view. This proactive approach ensures that security teams can respond promptly to any abnormal activity.

In summary, the Pelco C1306M-D represents a combination of advanced technology, user-centric design, and efficient performance. Its high-resolution imaging, flexible lens options, robust construction, and strong connectivity make it a compelling choice for organizations looking to enhance their surveillance capabilities. With its introduction back in July 2009, the camera continues to stand out in an industry that increasingly demands high quality and reliability.
Top Page Image Contents