American Standard M962689-0070A instruction

Installation

Instructions

PEKOE PULL DOWN 4332.300.XXX

SINGLE CONTROL KITCHEN

FAUCET with PULL DOWN SPRAY

Thank you for selecting American-Standard...the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certiﬁed to comply with ANSI A112.18.1M

M968581 Rev . 1 . 1

Recommended Tools

Phillips Screwdriver

Channel Locks	Adjustable Wrench	Plumbers' Putty or Caulking	Tubing Cutter

1 INSTALL FITTING

CAUTION	Turn off hot and cold water
	supplies before beginning.

Make certain the O-RING SEAL (1) is properly seated in recess of faucet body.

Insert supply HOSES (2), SHANK (3) and SPRAY HOSE (4) through center hole of sink or mounting surface.

Assemble RUBBER WASHER (5), PLASTIC WASHER (6), RUBBER & METAL “C” WASHERS (7) and long LOCKNUT (8) onto SHANK (3) from underside of sink. Hand tighten LOCKNUT (8) and check that faucet is centered.

Tighten LOCKNUT (8) with WRENCH (12) supplied. Insert screwdriver into hole in WRENCH (12) and tighten.

Feed HOSE END (9) through HOSE GUIDE (10). Slide other side of HOSE GUIDE (10) onto SHANK (3) and secure with LOCK NUT (11). Do not over tighten!

RECESS

4 3

5 6

SCREWDRIVER