Smeg ML60 manual Inspection and cleaning of the drain

Page 12

Instructions for the user

7.2Inspection and cleaning of the drain

1

2

3

4

If the outflow of water in the sink is not continuous, the drain needs to be cleaned (1).

Place a container underneath the drain to catch the water once the drain tube has been detached (2).

Remove the ring nut (3) then detach the drain tube (2); check for waste inside and remove it so that water can pass through freely. Reassemble the drain as it was originally and turn on the tap to check that water is draining correctly.

26

Image 12
Contents Contents Instructions for safety and use Safety and USE NoticesInstructions for the installer Installing the PartsInstalling the tap Installation diagram for sink parts Overflow drain Built-in installation PositioningInstallation on a trolley Connection to the water distribution networkWater Drain To a tankFor dispersion away from the sink To the networkGeneral instructions and advice Instructions for the userUSE of the Sink Description of the Controls Cleaning and Maintenance Cleaning stainless steelInspection and cleaning of the drain