Enable password, Fcc, Warranty, Customer Service

5. ADVANCED FEATURE - PASSWORD PROTECTION (CONT)

Enable password

1.Press 1 and 3 simultaneously and hold for more than 2 seconds until the LED flashes quickly but not until the LED flashes slowly.

2.Input old password.

3.Press 1 and 3 once simultaneously to confirm. If the password is correct, the password protection will be enabled.

You can toggle the two states - password protection enabled or disabled.

Note:

The time-out period is 10 seconds during any of the above setting operations. After 10 seconds, the LED will flash 3 times and the remote will exit from setting.

If you forget your password and want to reset MK-318-3, follow the steps below:

1.Press 1 and 2 simultaneously and hold for more than 10 seconds until the LED flashes.

2.After you release 1 and 2, the LED will be turned off and MK-318-3 will be reset. The password will be reset to factory default.

After the reset, password protection is removed but the remote can not control any receiver until you reprogram it to receivers you want to control.

6. FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

7. WARRANTY

If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.

8. CUSTOMER SERVICE

If you would like to

-find out the up-to-date specifications

-know more about features and applications

-download documents, i.e. user’s instructions

-order Skylink products

or if you have difficulty getting products to work, please:

1.visit our FAQ section at www.skylinkhome.com, or

2.email us at support@skylinkhome.com, or

3.call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST. Fax (800) 286-1320

CUSTOMER SERVICE

17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Email:support@skylinkhome.com http://www.skylinkhome.com

P/N : 101Z993-002 Patent Pending

MK-318-3 specifications

The SkyLink MK-318-3 is a cutting-edge drone designed for versatility, performance, and reliability, making it a preferred choice among both hobbyists and professionals. This advanced drone integrates state-of-the-art technologies and features that enhance its functionality and ease of use.

One of the standout features of the MK-318-3 is its impressive flight time. Equipped with a high-capacity lithium polymer battery, it can remain airborne for up to 30 minutes on a single charge. This extended flight duration allows users to capture high-quality aerial footage without the constant need to land and recharge. Additionally, the drone is designed with a lightweight carbon fiber body that not only contributes to its durability but also improves its flight efficiency.

The MK-318-3 incorporates advanced stability technologies, including a 3-axis gimbal stabilization system. This feature ensures that the camera remains steady during flight, resulting in smooth and professional-grade video recordings. The drone boasts a high-resolution 4K camera capable of capturing stunning images and videos from various angles. Users can also take advantage of real-time HD video transmission, allowing them to see exactly what the drone sees during flight.

Another key characteristic of the SkyLink MK-318-3 is its intelligent flight modes. These include GPS-assisted navigation, follow-me mode, and point-of-interest flight planning. The GPS technology enables precise positioning and return-to-home capabilities, enhancing user confidence and safety during operations. The follow-me mode allows the drone to autonomously track a subject, making it ideal for action sports and outdoor activities.

The MK-318-3 also features an intuitive control system, compatible with both smartphone and tablet devices. Users can manage the drone through a user-friendly app that provides easy access to various settings and features. As an added benefit, the drone is designed with obstacle avoidance sensors that help prevent collisions, making it suitable for users of all skill levels.

In summary, the SkyLink MK-318-3 is a versatile and feature-rich drone that combines performance, advanced technologies, and ease of use. It is ideal for aerial photography enthusiasts and professionals looking for an efficient and reliable tool for capturing stunning visuals from the sky. With its robust design, intelligent features, and impressive camera capabilities, the MK-318-3 is poised to meet the demands of any aerial imaging project.