Introduction, Opener EQ Series, Battery | SkyLink MK-318-3 instruction

3-Button Garage Door	Model MK-318-1
3-Button Garage Door	Model MK-318-2
Remote Control	Model MK-318-3

1. INTRODUCTION

Thank you for your purchase of Skylink® Remote, Model MK-318-1/MK- 318-2/MK-318-3.

The following items are included in this package:

- One of MK-318 series Remotes

- Lithium Battery CR-2032 (Installed)

- User’s Instructions

1-Button 2-Button 3-Button Transmiter Transmiter Transmiter

MK-318-1 MK-318-2 MK-318-3

There are one or two or three buttons on transmitter, each button can be programmed to control Skylink garage door receiver Smart ButtonTM GB-318 or Skylink garage door opener directly.

Follow one or more instructions below in Section 2 to program transmitter MK-318 to the receiver or receivers you want to control.

2a. PROGRAM TRANSMITTER TO RECEIVER GB-318

You need to do the programming in order to add the transmitter - remote control to a receiver.

Refer to the receiver Smart ButtonTM GB-318 user’s instruction to set up the unit.

Smart ButtonTM GB-318 can learn up to 10 remote controls.

To program the transmitter to the receiver, follow the instructions below:

1.Press the learn button on the side of the Smart ButtonTM GB-318.

2.Once the learn button is pressed, the LED will flash quickly. Release the learn button.

3. Within 30 seconds, press any one of the 3 buttons	Antenna
on the transmitter that you want to program to the
receiver.
4. Once the remote control is programmed, the LED		LED
will flash slowly, in the same way as it flashes
in standby mode.
5. You may now operate the garage door opener		Learn
with this new remote control.		Button
6. To program this transmitter to control another	Smart ButtonTM
receiver, repeat process (1) to (4) to program	GB-318
another button on the remote control.

2b. PROGRAM A TRANSMITTER TO THE SKYLINK® GARAGE DOOR
OPENER - EQ SERIES

You need to do the programming in order to add the transmitter to a Skylink® Garage Door Opener.

Skylink® Garage Door Opener can learn up to 16 remote controls.

To program the transmitter to the Garage Door Receiver, follow the instructions below:

1.Press the LEARN/SET button once on the garage door opener.

2.Once the LEARN/SET buttton is pressed, the LEARN LED will flash. You may release the LEARN/SET button.

3.Within 30 seconds, press any one of the 3 buttons on the transmitter that you want to program to the receiver.

4.Once the transmitter is programmed, the LEARN LED will turn off.

5.You may now operate the garage door opener with this new transmitter.

6.To program a transmitter to control another garage door opener, repeat process (1) to (4) to program another button on the transmitter.

Learn Button

2c. PROGRAM A TRANSMITTER TO THE SKYLINK® GARAGE DOOR

OPENER - IQ SERIES

To program the transmitter to the Skylink® IQ series Garage Door Opener, please follow the user’s instruction from the Garage Door Opener.

3.TROUBLE SHOOTING

Q:What can I do if the door opener does not react after I press the button on the transmitter ?

A:- Ensure when the button on the transmitter is pressed, the red light on the transmitter comes on. Otherwise, check if the battery is inserted properly.

-Make sure the correct button on the transmitter is pressed.

-Ensure the wires that were previously connected to the wall mounted door control are not loose.

-Ensure the transmitter has been programmed to the receiver. Refer to section 2 for how to program a transmitter to the receiver.

4. BATTERY

3 Volt lithium battery (CR 2032) (included).

It is time to change the battery when the red LED on the transmitter does not turn on when either button is pressed.

5. ADVANCED FEATURE - PASSWORD PROTECTION

Password protection (Only available for MK-318-3 (Not available for MK-318-1 or MK-318-2)

The MK-318-3 can be password protected. If you enable the password protection, you can only operate MK-318-3 after you input the correct password.

Password can be 2-8 digits long, which is a combination of 1, 2 and 3. For example, password can be 1, 2, 1, 2. To input this password, you have to press button [1], then [2], then [1], then [2].

Note:

[1] = Button 1 [2] = Button 2 [3] = Button 3

Button [1]

Button [2]

Button [3]

Note:

The time-out period is 1 second during above password input.

The factory default password is 2, 2, 2, and this password function is disabled out of factory.

Change password

1.Press 1 and 3 simultaneously and hold for more than 6 seconds until the LED changes from flashing quickly to flashing slowly.

2.Input old password.

3.Press 1 and 3 once simultaneously to confirm. If the password is wrong, the LED will flash 3 times and you have to start it over from step1.

4.Input new password.

5.Press 1 and 3 once simultaneously to confirm.

6.Input new password again.

7.Press 1 and 3 once simultaneously to RE-confirm. If the password is different from the one of step 4, the LED will flash 3 times and you have to start over from step 1. Otherwise, the password has been changed to the new one and the password protection is enabled.

Disable password

1.Press 1 and 3 simultaneously and hold for more than 2 seconds until the LED flashes quickly but not until the LED flashes slowly.

2.Input old password.

3.Press 1 and 3 once simultaneously to confirm. If the password is correct, the password protection will be disabled.

MK-318-3 specifications

The SkyLink MK-318-3 is a cutting-edge drone designed for versatility, performance, and reliability, making it a preferred choice among both hobbyists and professionals. This advanced drone integrates state-of-the-art technologies and features that enhance its functionality and ease of use.

One of the standout features of the MK-318-3 is its impressive flight time. Equipped with a high-capacity lithium polymer battery, it can remain airborne for up to 30 minutes on a single charge. This extended flight duration allows users to capture high-quality aerial footage without the constant need to land and recharge. Additionally, the drone is designed with a lightweight carbon fiber body that not only contributes to its durability but also improves its flight efficiency.

The MK-318-3 incorporates advanced stability technologies, including a 3-axis gimbal stabilization system. This feature ensures that the camera remains steady during flight, resulting in smooth and professional-grade video recordings. The drone boasts a high-resolution 4K camera capable of capturing stunning images and videos from various angles. Users can also take advantage of real-time HD video transmission, allowing them to see exactly what the drone sees during flight.

Another key characteristic of the SkyLink MK-318-3 is its intelligent flight modes. These include GPS-assisted navigation, follow-me mode, and point-of-interest flight planning. The GPS technology enables precise positioning and return-to-home capabilities, enhancing user confidence and safety during operations. The follow-me mode allows the drone to autonomously track a subject, making it ideal for action sports and outdoor activities.

The MK-318-3 also features an intuitive control system, compatible with both smartphone and tablet devices. Users can manage the drone through a user-friendly app that provides easy access to various settings and features. As an added benefit, the drone is designed with obstacle avoidance sensors that help prevent collisions, making it suitable for users of all skill levels.

In summary, the SkyLink MK-318-3 is a versatile and feature-rich drone that combines performance, advanced technologies, and ease of use. It is ideal for aerial photography enthusiasts and professionals looking for an efficient and reliable tool for capturing stunning visuals from the sky. With its robust design, intelligent features, and impressive camera capabilities, the MK-318-3 is poised to meet the demands of any aerial imaging project.

Remote Control

Model MK-318-3