Battery, Warranty, Customer Service | SkyLink GS1 specification

Button [ 1 , 2, 3 ]

7. TRANSMITTER MOUNTING METHOD (CONT)

Mounted on the windshield

Peal off the double sided tape cover.

Stick the

double sided tape on the back of the bracket.

Mounted on the visor

Attach visor clip to bracket.

8. TRANSMITTER PASSWORD PROTECTION

9. OPTIONAL ACCESSORIES AND OPERATIONS

You can add up to 10 additional transmitters to control the GB-318. Skylink® offers different lighting control / automation transmitters, Visor Transmitters,

Keychain Transmitters and Keypad Transmitters to work with your receiver.

Program additional remote controls

Smart ButtonTM GB-318 can learn up to 10 remote controls.

To learn additional remote controls, follow the instructions below:

1. Press the learn button on the side of the GB-318.

2. Once the learn button is pressed, the LED will flash quickly. Release the learn button.

LED

3. Within 30 seconds, press the button on the remote control you would like to program.

4. Once the remote control is programmed, the LED will flash slowly, in the same way as it flashes in standby mode.

5. You may now operate the garage door opener

Password protection

with this remote control.

Learn Button

The G6T3 can be password protected. If you enable the password pro- tection, you can only operate G6T3 after you input the correct password.

Password can be 2-8 digits long, which is a combination of 1, 2 and 3. For example, password can be 1, 2, 1, 2. To input this password, you

have to press [ ], then [ ], then [ ], then [ ].

Note:
[ ] = Button 1 [	] = Button 2 [	] = Button 3

Note:

The time-out period is 1 second during above password input.

The factory default password is 2, 2, 2, which is disabled out of factory.

Change password

1.Press 1 and 3 simultaneously and hold for more than 6 seconds until the LED changes from flashing quickly to flashing slowly.

2.Input old password.

3.Press 1 and 3 simultaneously to confirm. If the password is wrong, the LED will flash 3 times and you have to start it over from step1.

4.Input new password.

5.Press 1 and 3 simultaneously to confirm.

6.Input new password again.

7.Press 1 and 3 simultaneously to RE-confirm. If the password is different from the one of step 4, the LED will flash 3 times and you have to start over from step 1. Otherwise, the password has been changed to the new one and the password protection is enabled.

Disable password

1.Press 1 and 3 simultaneously and hold for more than 2 seconds until the LED flashes quickly but not until the LED flashes slowly.

2.Input old password.

3.Press 1 and 3 simultaneously to confirm. If the password is correct, the password protection will be disabled.

Enable password

1.Press 1 and 3 simultaneously and hold for more than 2 seconds until the LED flashes quickly but not until the LED flashes slowly.

2.Input old password.

3.Press 1 and 3 simultaneously to confirm. If the password is correct, the password protection will be enabled.

You can toggle the two states - password protection enabled or disabled.

Note:

The time-out period is 10 seconds during any of the above setting operations. After 10 seconds, the LED will flash 3 times and the remote will exit from setting.

If you forget your password and want to reset G6T3, follow the steps below:

1.Press 1 and 2 simultaneously and hold for more than 10 seconds until the LED flashes.

2.After you release 1 and 2, the LED will be turned off and G6T3 will be reset. The password will be reset to factory default.

After the reset, password protection is removed but the remote can not control any receiver until you reprogram it to receivers you want to control.

For more information, please visit our website at www.skylinkhome.com or contact us.

10. BATTERY

3 Volt lithium battery (CR 2032) (included).

It is time to change the battery when the red LED on the transmitter does not turn on when either button is pressed.

11. WARNING

DO NOT let children use the garage door transmitter without adult supervision. Otherwise, Children and others may be injured by the garage door.

12. FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

13. WARRANTY

If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.

14. CUSTOMER SERVICE

If you would like to

-find out the up-to-date specifications

-know more about features and applications

-download documents, i.e. user’s instructions

-order Skylink products

or if you have difficulty getting products to work, please:

1.visit our FAQ section at www.skylinkhome.com, or

2.email us at support@skylinkhome.com, or

3.call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST. Fax (800) 286-1320

CUSTOMER SERVICE

17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Email:support@skylinkhome.com http://www.skylinkhome.com

P/N. 101Z865-002

Patent Pending

GS1 specifications

SkyLink GS1 is an advanced satellite communication system designed to meet the growing demands of modern satellite communication. Offering a robust set of features and leveraging cutting-edge technology, the GS1 is a versatile tool for various applications, including telecommunication, broadcasting, and data transmission.

One of the standout features of the SkyLink GS1 is its high-speed connectivity. It provides users with enhanced bandwidth capabilities, allowing for fast data transfer rates that are crucial for both personal and commercial uses. This system caters to a wide range of bandwidth requirements, ensuring reliable communication whether in remote locations or urban settings.

The GS1 employs advanced modulation techniques to maximize data throughput while minimizing latency. Technologies such as Adaptive Coding and Modulation (ACM) allow the satellite to adjust its transmission based on real-time conditions, ensuring optimal performance regardless of environmental challenges. This adaptability makes the GS1 an excellent choice for users who require stable connectivity in diverse situations.

In terms of hardware, the SkyLink GS1 integrates high-performance satellite antennas and transceivers. This assembly enhances signal strength and reliability, ensuring that users experience minimal interference even during adverse weather conditions. The system's design focuses on durability and longevity, providing a solution that can withstand the rigors of outdoor usage, which is particularly beneficial for industries like maritime, aviation, and disaster recovery.

Furthermore, the SkyLink GS1 supports various deployment scenarios, from portable units designed for quick setup in emergency situations to stationary systems for long-term use. The flexibility of deployment means that organizations can tailor their satellite communication solutions to meet specific needs, optimizing their operational efficiency.

Security is another critical aspect of the GS1 system. It incorporates encrypted communication protocols to protect users' data from unauthorized access. This ensures that sensitive information remains secure, which is essential for government, military, and corporate applications that require a high level of confidentiality.

Overall, the SkyLink GS1 is a state-of-the-art satellite communication solution that combines high-speed connectivity, adaptability, durability, and security. Its comprehensive features and technologies position it as a reliable choice for a wide array of communication needs in today's increasingly connected world.