Install Handles, Test Installed Fitting

9 INSTALL HANDLES
Push ADAPTER (1) on VALVE STEM (2), so that the hole of the
ADAPTER (1) without a spline is facing up. Fig. A. Tighten		THREAD ON
STEM SCREW (3) to secure ADAPTER (1).		THREAD ON
STEM SCREW (3) to secure ADAPTER (1).	4	TO DECK
	4	ADAPTER
Find correct position of LEVER HANDLE ASSEMBLY (4) by adjusting
male teeth on ADAPTER (1) to female teeth in HANDLE (4).	TOP
Thread LEVER HANDLE ASSEMBLY (4) onto DECK ADAPTER (5)		1
until snug against mounting surface.		3
Fig. A.		3
Fig. A.		2
		2

SPLINE END DOWN

10 TEST INSTALLED FITTING

With HANDLES (1) in OFF position, turn on WATER SUPPLIES (2) and check all connections for leaks.

Remove AERATOR (3).

	Operate both HANDLES (1) to ﬂush water	1
	lines thoroughly.	1
	lines thoroughly.
	Replace AERATOR (3).

11 CHECK DRAIN CONNECTIONS

	1
5	3
	3

Operate POP-UP KNOB (5) and ﬁll Sink with water. Check that DRAIN STOPPER (4) makes a good seal and retains water in Sink. If STOPPER (4) does not seal properly, please refer to “Troubleshooting Guide” in these instructions.

Release POP-UP KNOB (5) down and check all drain connections and "P" trap for leaks. Tighten

if necessary.

WASTE OUTLET

COLD

HOT

“P” TRAP

12 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER.DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

13 SERVICE

To change direction of handle rotation,
proceed as follows:		UNTHREAD
	Turn valve to OFF position. Unthread HANDLE	UNTHREAD


	BASE (1) from DECK ADAPTER (2).	1
	Pull HANDLE ASSEMBLY off VALVE STEM (3).


	Remove SPRING CLIP (4). Lift STOP WASHER (5),


	turn 90˚ and replace. Replace SPRING CLIP (4).
	Find correct position of HANDLE ASSEMBLY by adjusting

	male teeth on VALVE STEM (3) to female teeth in HANDLE.
	Thread HANDLE ASSEMBLY onto DECK ADAPTER (2)


	until snug against mounting surface.	4
If spout drips, operate handles several times from		4
If spout drips, operate handles several times from		2
OFF to ON position. Do not force - handles turn

only 90˚.

HANDLE

ASSEMBLY

90˚	3
	5

M968868 Rev 1 . 2

7038 specifications

The American Standard 7038 is a notable addition to the landscape of modern bathroom fixtures, particularly known for its efficiency, durability, and innovative design. This toilet model exemplifies the brand's commitment to quality and user satisfaction.

One of the standout features of the American Standard 7038 is its WaterSense certification, meaning it has been engineered to use significantly less water while still providing powerful flushing performance. With a flush volume of just 1.28 gallons per flush (GPF), it conserves water effectively without compromising on effectiveness. This eco-friendly aspect not only benefits the environment but also translates into lower water bills for homeowners.

Technologically, the American Standard 7038 is equipped with the company's patented EverClean surface. This innovative feature incorporates an antimicrobial coating that helps to inhibit the growth of bacteria, mold, and mildew, promoting a cleaner, more sanitary bathroom environment. The smooth finish of the EverClean surface makes it easier to wipe down and maintain, reducing the time and effort required for cleaning.

In terms of design, the American Standard 7038 boasts a sleek, elongated bowl that provides added comfort and space. The height of the toilet is also designed for accessibility, making it easier for individuals of all ages and abilities to use. The clean, modern lines of the toilet contribute to its overall aesthetic, allowing it to seamlessly fit into various bathroom styles.

Another important characteristic of the American Standard 7038 is its robust construction. Made from high-quality vitreous china, the toilet is designed to withstand the rigors of daily use while maintaining its appearance over time. Additionally, the toilet features a powerful siphon jet flushing system, which enhances the overall cleaning performance by creating a strong, efficient flush that eliminates waste effectively.

Overall, the American Standard 7038 combines modern technology, user-friendly design, and eco-conscious features to deliver a reliable, efficient, and stylish toilet option. Suitable for both residential and commercial use, this model has become a popular choice for homeowners and builders alike, reflecting the era's growing demand for sustainable yet stylish bathroom solutions. With its blend of performance and practicality, the American Standard 7038 stands out as a leading choice in bathroom fixtures.

9 INSTALL HANDLES

Fig. A.