American Standard 4332.350.XXX installation instructions Instructions, Install Fitting

	Installation
PEKOE	Instructions
	4332.350.XXX
Single Lever Semi-Professional
Kitchen Faucet

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1M

M968577 Rev . 1 . 1

Recommended Tools

Phillips Screwdriver

Channel Locks Adjustable Wrench Plumbers' Putty or Caulking Tubing Cutter

1 INSTALL FITTING

CAUTION	Turn off hot and cold water
	supplies before beginning.

Make certain the SEAL (1) is properly seated in recess of faucet body.

Insert supply HOSES (2) and SHANK (3) through center hole of sink or mounting surface.

Assemble RUBBER WASHER (4), PLASTIC WASHER (5),

METAL WASHER (6) and threaded LOCKNUT (7) onto

SHANK (3) from underside of sink or mounting surface.

Hand tighten LOCKNUT (7) and check that faucet is centered.

Use a screwdriver to tighten SCREWS (8) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening the screws slightly each time until all are snug to ensure even pressure.

RECESS

3

4

5

6

7

8

1

2