Setting up the system
Follow the “Owner’s Manual <Setup>” to set up the system first.
Precautions
∫Speakers
≥Keep your speakers at least 10 mm away from the system to avoid noise generated by resonance.
≥For optional wall mount, refer to page 32.
Centre speaker
≥Put it on a rack or shelf not to interfere with the TV’s various sensors (ambient light, etc.). Vibration caused by the speaker can disrupt the picture if it is placed directly on the TV.
Surround speakers
≥Place the speakers at the same height or higher than ear level.
∫HDMI
≥Use the ARC* compatible High Speed HDMI cables.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters or less.
*ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home theatre system to receive and play audio from the TV through a single HDMI cable without additional wiring.
∫DIGITAL AUDIO IN
≥The dual audio cannot be changed. Change the setting on the connected device.
∫AC mains lead
≥This unit consumes a small amount of AC power (> 40) even when turned off in standby mode. For the purpose of energy conservation, the unit should be disconnected if you will not be using it for extended period of time.
Other device connection
e.g.,
Set Top Box, etc.
OPTICAL
OUT
Optical digital audio cable (not supplied)
Getting started
VQT5F59 11