Panasonic SC-BTT405, SC-BTT465, SC-BTT105 owner manual Sound

Sound

∫[BTT465] [BTT405] Surround Effects (> 25)

∫Sound Effects (> 25)

∫Dynamic Range Compression

You can listen at low volumes but still hear dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥“Automatic” is effective only when playing Dolby TrueHD.

∫Digital Audio Output

Press [OK] to show the following settings:

¾Dolby D/Dolby D +/Dolby TrueHD

¾DTS/DTS-HD

Select the audio signal to output.

≥Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

≥If you do not make proper settings the audio may be static or noisy.

¾BD-Video Secondary Audio

Select whether or not to mix the primary and secondary audio (including the button click sound).

If “Off” is selected, the unit outputs the primary audio only.

¾HDMI Audio Output

This setting selects whether or not to output audio from HDMI.

∫TV Audio Input

Select the TV audio input to work with the HDMI CEC operations.

∫Downmix

Select the downmix system of multi-channel to 2-channel sound.

≥Select “Surround encoded” to enjoy the surround sound.

≥There is no downmix effect on the bitstream audio signal.

≥The audio will be output in “Stereo” in the following cases:

–AVCHD playback

–Dolby TrueHD playback

–Playback of secondary audio (including the button click sound).

∫Audio Delay

Synchronization between picture and sound is corrected by adjusting the delay time of the audio output.

∫Speaker

Press [OK] to show the following settings:

¾Speaker Distance

Set the distance between each speaker and the seating position.

≥If you set “Test Tone” to “On”, each speaker will output a test signal sound in sequence.

¾Speaker Level

Set the volume of each speaker.

≥If you set “Test Tone” to “On”, each speaker will output a test signal sound in sequence.

3D

∫3D BD-Video Playback

Select the playback method of 3D compatible video software.

∫3D Playback Message

Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.

∫Graphic Display Level (> 25)

Advanced operations

VQT5F59 27