American Standard 0558.700 dimensions Williamsburg Countertop Sink, Barrier Free, Bowl sizes

WILLIAMSBURG™ COUNTERTOP SINK

BARRIER FREE

VITREOUS CHINA

WILLIAMSBURG COUNTERTOP SINK

•Vitreous china

•Self-rimming

•Front overflow

•Supplied with cutout template

•Faucet ledge (faucet not included)

❏0558.700 Faucet holes on 8” (203mm) centers

❏0554.700 Faucet holes on 4” (102mm) centers (illustrated)

Nominal Dimensions:

24-1/2" x 18" (622 x 457mm)

Bowl sizes:
17" (432mm) wide,
10-1/2" (267mm) front to back,
5-1/2" (140mm) deep					FINISHED WALL
					OR SPLASHBACK		610mm
Compliance Certifications -						70mm	(24)
		102mm			OPTIONAL
						(2-3/4)
Meets or Exceeds the Following		(4)
					67mm
Specifications:
					(2-5/8)
• ASME A112.19.2M for Vitreous China					183mm
					(7-3/16)
	Fixtures
							203mm
					457mm		(8)
							MIN.
					(18)
			C/L			857mm
						(33-1/4)
						686mm
			616mm			(27)
						MIN.		152mm
			(24-1/4)
				19mm	SEALING			(6)
								MAX.
					COMPOUND
		COUNTER (BY OTHERS)		(3/4)
							BARRIER FREE
To Be Specified							CLEARANCE	229mm
					178mm			(9)
		*248mm						MIN.
	Color:				(7)
❏		(9-3/4)
❏	Faucet*:		203mm	*343mm
		SUPPLIES	(8)	(13-1/2) 178mm
		AS REQ'D			(7)
❏	Faucet Finish:	1-1/4 O.D.
❏	Supplies:	WASTE			787mm (31)
			FINISHED FLOOR
		1-1/4 O.D			857mm (33-1/4)
❏	1-1/4" Trap:	TAILPIECE
* See faucet section for additional models available		NOTES:

*DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

MEETS THE AMERICAN DISABILITIES ACT GUIDELINES	These measurements are subject to change or cancellation. No responsibility is assumed for use of
AND ANSI A117.1 ACCESSIBLE AND USEABLE	superseded or voided pages.
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.

Lavatory installed 70mm (2-3/4") minimum from front edge of countertop provides 686mm (27") knee clearance area.

© 2003 American Standard Inc.