PYLE Audio PLMD8 manual Interference on 87.7MHz, Frequency Selector Switch, Specifications

Page 2

INSTRUCTION MANUAL

PLL FM Stereo Modulator

BEFORE INSTALLING THE MODULATOR

1.Do not install the unit in the following locations.

Locations exposed to direct sunlight.

Where hot air is discharged from the car heater.

In areas subject to extreme temperatures.

2.Be careful not damage the car wiring.

3.Be sure to use the supplied screws.

INSTALLATION

The FM Stereo Modulator must be mounted within 24inches of your radio so that its power cable can reach the radio power antenna lead.It can be fixed to any flat surface behind the instrument panel with two 3mm taping screws.

Your final choice of location should allow for the insertion or removal of the Cable from the FM Stereo Modulator Unit.

Also,the FM Station Frequency Selector Switch is located on the side and you may wish to change it after your initial checkout or somtime in the future.

FM RADIO FREQUENCY PRESET

The FM Stereo Modulator can operate on from 87.7MHz to 88.9MHz. (7channel-200KHz Step)

The Frequency Selector Slide Switch is on one channel of the Modulator and was set 87.7MHz at the factory.Assuming it is still there,turn on the car stereo and select FM band operation.Tune the radio to 87.7MHz ( depending on frequency to which the installer has set the unit),or push the pre-set memory button.

INTERFERENCE ON 87.7MHz:

If interference experienced is on 87.7MHz,change the position of the frequency select switch on the side of the FM Stereo Modulator and tune the radio 87.7-88.9MHz.

 

 

Frequency

 

 

Selector Switch

FREQUENCY SELECTOR SWITCH

 

 

 

 

1 2 3 4

Frequency(MHz)

 

 

 

 

 

87.7MHz

 

 

 

 

 

87.9MHz

 

 

 

 

 

88.1MHz

 

 

 

 

 

88.3MHz

 

 

 

 

 

88.5MHz

 

 

 

 

 

88.7MHz

 

 

 

 

 

88.9MHz

 

 

 

SPECIFICATIONS:

Frequency:

87.7MHz to 88.9MHz (7channel-200KHz Step)

RF Output Level:

60dB

Max

S/N Ratio:

65dB

 

Stereo Separation:

40dB

 

FM Modulation Depth:

75KHz at L+R+Pilot

Operating Voltage:

10 ~16V DC

Dimensions:

88W

30H 50Dmm

Weight:

180g

 

Specifications and design are subject to change without notice

Image 2
Contents Installation PLMD8Interference on 87.7MHz Frequency Selector SwitchSpecifications

PLMD8 specifications

The PYLE Audio PLMD8 is a versatile and high-performance marine-grade speaker designed to deliver exceptional sound quality while withstanding harsh outdoor conditions. Perfectly suited for boat applications or outdoor adventures, the PLMD8 is equipped with a range of features and technologies that set it apart in the market.

One of the standout characteristics of the PLMD8 is its robust construction. The speaker is designed with a durable, weather-resistant enclosure that can handle exposure to water and UV rays. This ensures longevity and sustained performance, making it ideal for marine environments where moisture and corrosion are common concerns. The speaker’s non-corrosive plastic housing and stainless steel grill further enhance its durability, allowing users to enjoy high-quality audio without worrying about damage from the elements.

The PYLE PLMD8 boasts an impressive power handling capability, with a peak power of 600 watts and a RMS of 300 watts. This allows the speaker to deliver loud, clear audio even in noisy environments. Its 8-inch mid-bass subwoofer driver provides a rich, deep bass response, while the 1-inch tweeter produces crisp highs, resulting in a well-rounded sound that caters to a variety of musical preferences.

In addition to its powerful audio output, the PLMD8 features a unique design that allows for easy installation and integration into various setups. The speaker is equipped with a universal mounting system that enables it to be fitted onto boats, ATVs, and other outdoor vehicles without hassle. Its sleek design enhances the aesthetic appeal of any installation, combining function and style seamlessly.

Another notable feature of the PYLE Audio PLMD8 is its built-in LED lighting system. This adds a dynamic visual element to any audio experience, making it a great choice for parties or gatherings on the water. The customizable lighting options allow users to tailor their ambiance according to their preferences.

Overall, the PYLE Audio PLMD8 encapsulates a perfect blend of performance, durability, and aesthetic appeal. With its high power handling, superior sound quality, and weather-resistant design, this speaker is an outstanding choice for anyone looking to enhance their outdoor audio experience. Whether you’re cruising on a boat or enjoying a day at the beach, the PLMD8 ensures that you won’t miss a beat, combining functionality with a visually striking presence.