Philips 46PFL8605 /98 Enable or disable EasyLink, Enable or disable remote control key forwarding

When watching TV, press (Experience).

»» The experience bar appears.

When watching TV, press »» The home menu appears.

(Home).

Enable or disable EasyLink

Note

•• Do not enable Philips EasyLink if you do not intend to use it.

1 When watching TV, press (Home). »» The home menu appears.

2 Press the Navigation buttons to select [Setup], then press OK.

3 Select [Advanced TV settings], then press OK.

4 Select [EasyLink] > [EasyLink], then press OK.

5 Select [On] or [Off] .

6 Press OK to confirm your choice.

»» EasyLink is enabled or disabled.

Enable or disable remote control key forwarding

Note

•• Enable EasyLink before enabling remote control key forwarding.

1 When watching TV, press (Home). »» The home menu appears.

2 Press the Navigation buttons to select[Setup], then press OK.

3 Select [Advanced TV settings], then press OK.

4 Select [EasyLink] > [EasyLink Remote Control], then press OK.

5 Select [On] or [Off].

6 Press OK to confirm your choice

»» RC key forwarding is enabled or disabled on the selected HDMI connector.

Note

•• If you cannot exit from a device’s menu, press

.

Configure TV speakers

You usually connect the TV to a HDMI-CEC compliant device such as a HTS using both a HDMI cable (for video) and a digital audio cable (for audio). You can output TV audio through the HDMI cable solely, provided both the TV and device are HDMI-ARC compliant (see ‘Use HDMI ARC’ on page 36).

1

2 Press the Navigation buttons to select [Setup], then press OK.

3 Select [Advanced TV settings], then press OK.

4 Select [EasyLink] > [TV speakers], then press OK.

5 Select a setting, then press OK.

•[On]: Turns on TV speakers.

•[Off]: Turns off TV speakers.

•[EasyLink]: TV audio is streamed through the TV speakers. Switch the TV audio to the connected HDMI- CEC audio device through the experience menu.

•[EasyLink autostart]: Turn off TV speakers automatically and streams TV audio to the connected HDMI- CEC audio device.

Select speakers in experience mode

If you have set your TV speakers to [EasyLink] or [EasyLink autostart], access the experience bar to switch the TV audio.

1

2 Press the Navigation buttons to select [Speakers], then press OK.

38 EN

Downloaded From TV-Manual.com Manuals