Printing Tasks
1 |
2 |
Printing on Envelopes
CAUTION
Before you load envelopes in Tray 1, make sure they are undamaged and are not stuck together. Never use envelopes with clasps, snaps, windows, coated linings,
3
1 Open Tray 1 by pulling the front cover down.
2 Open the rear output bin by pulling down on the top section of the bin. Slide out the extender until it extends fully.
Note
Using the rear output bin reduces envelope curl.
3 Slide the width guides on Tray 1 outward slightly wider than the media.
Continued on next page.
EN | Chapter 2 Printing Tasks 35 |
