American Standard 4101.115 Connect Spray Hose and Install Weights, Check Connections for Leaks

	CONNECT SPRAY HOSE AND INSTALL WEIGHTS
3
	With PULL-OUT SPRAY (1) seated in SPOUT (2),	2
	install WEIGHTS (3) onto HOSE (4) using two

SCREWS (5). Locate the WEIGHTS (3) two feet (2') from the underside of the sink deck.

Tighten SCREWS (5) firmly.

Make sure SEAL WASHER (7) is installed in COUPLING

NUT (6). Connect threaded end of HOSE (4) to SPRAY HOSE

COUPLING NUT (6) from fitting. Use wrench to tighten.

1

6

7

24"

5

3 4

4 CHECK CONNECTIONS FOR LEAKS.

Move HANDLE (1) down into "off" position.

Turn on water supplies and check connections for leaks.

1

CHECK CONNECTIONS

FOR LEAKS

M968584