Vanity Installation

Provide suitable reinforcement required for anchoring the vanity to the wall. Centerline of reinforcement should be 27-3/4" up from the floor (see Figure 1).

Open vanity drawers. Remove screws from inside drawers and pull drawers off drawer glides. (see Figure 2). If molding is present, it will need to be notched to set the vanity flush against the wall. (see Figure 3). Rough in supply lines and waste per rough in dimensions.

NOTE: If current supply lines are greater than 6" on center, they may interfere with cutout in rear of vanity or vanity shelf.

Move the vanity into place and level with the adjustable glides on the bottom of the feet. The glides can be adjusted outward up to 3/4" but it is recommended not to exceed 1/2" if possible. Anchor it to the wall through at least 2 of the anchoring holes in the rear of the vanity (see Figure 4).

FIGURE 2

REMOVE

SCREWS

C/L of 2 x 6
Reinforcement
FIGURE	27-3/4"
	1
	Finished
	Floor

DRAWER

21 (533mm)

FIGURE 4

FIGURE 3

ADJUSTABLE GLIDES (LOCATED UNDER EACH FOOT)

C/L

27-1/2"

578mmANCHORING HOLES (3)

MOLDING

Using a 3/8" O.D. drill, drill 3 anchoring holes, equally spaced, in back support of vanity (see Figure 4).

Continue with installation appropriate for top and sink options chosen.

Installing the Newbern Top…

Two people recommended for this installation

Mount the drain assembly (not included) on the sink. Be certain to apply a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing the drain on the sink.

Apply a bead of silicone adhesive to the rim of the vanity. Place the Newbern top centered left to right on the vanity and with the back edge of the top even with the rear of the vanity. Clean up any excess silicone.

Place top back on vanity and, connect the trap to the drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "B") or part horizontal leg of the trap (area "C").

Connect hot and cold supply lines to the shut off valves. Tighten trap joints for watertight assembly.

- 2 -

7301050-100 Rev.C

9437.200, 7820.800 specifications

The American Standard 7820.800,9437.200 is a highly regarded toilet model known for its combination of efficiency, comfort, and modern design. As a part of American Standard’s commitment to excellence in bathroom fixtures, this toilet embraces cutting-edge technology and innovative features that elevate the overall bathroom experience.

One of the standout features of the 7820.800,9437.200 is its water-saving design. Utilizing a Dual Flush system, this toilet allows users to choose between a full or reduced flush, significantly conserving water without compromising performance. The full flush effectively handles solid waste with a powerful 1.6 gallons per flush (GPF), while the reduced flush uses only 1.0 GPF for liquid waste. This not only helps to save water but also aligns with eco-friendly practices, making it an ideal choice for environmentally conscious consumers.

Comfort is another key characteristic of this model. The American Standard 7820.800,9437.200 features a comfortable height design, often referred to as “Right Height,” which is significantly taller than standard toilets. This makes sitting and standing easier for users of all ages, providing a more accessible and comfortable experience, particularly for individuals with mobility issues.

The toilet’s design is sleek and modern, blending seamlessly into various bathroom styles. Its elegant lines and compact footprint allow it to fit well in both spacious and smaller bathrooms. Additionally, the coated surface makes cleaning a breeze, as it helps to resist stains and debris, ensuring your toilet remains hygienic and visually appealing.

Featuring American Standard’s innovative EverClean surface, this model is designed to inhibit the growth of stain and odor-causing bacteria, enhancing the toilet’s cleanliness over time. This technology not only promotes better hygiene but also reduces maintenance efforts, allowing homeowners to spend less time cleaning.

With its efficient water usage, comfortable height, modern aesthetic, and advanced cleaning technologies, the American Standard 7820.800,9437.200 stands out as a prime choice for those seeking a high-quality toilet solution. By marrying form and function, it reflects American Standard’s long-standing reputation for durability and reliability in plumbing fixtures, making it a worthy investment for any bathroom.