Manuals / HomeTech / Household Appliance / Home Safety Product

HomeTech PMS03 manual LED Motion Indicator Code Indicator Manual Off delay, Behind Lens, RF Base

Models: PMS03

1 2
Download 2 pages 63.22 Kb
Page 1
Image 1

Outdoor Motion Sensor

PMS03

 

 

 

 

Detects Motion

LED - Motion Indicator Code Indicator

Manual Off delay

 

and Dusk/Dawn

Command Indicator

after motion

 

 

 

Green LED

Wireless RF Signal to

Behind Lens

RF Transceiver

 

X10 - Code, On/Off

 

 

Plugs Into

Buttons in Battery

 

 

Outlet

Compartment

 

PAT01

***

House/On

Unit/Off

RF Base

Sends

Transceiver

X10

 

 

 

 

 

Commands

Description: The Outdoor Motion Sensor, PMS03, is a battery operated, RF Transmitter capable of sensing: Motion and Dusk/Dawn events. It transmits an X10 Command to an X10 PRO RF Base Transceiver (PAT01) which then passes the X10 Command onto the AC wiring of the structure. This can be used to control X10 PRO Receiver Modules, i.e. - Light and Appliance Modules, ON/OFF. The X10 Command can also be used, as a trigger, to initiate Macros in the CM11A, ActiveHome Two-Way Computer Interface Module. This would allow for complex routines to be executed as soon as the PMS03 detects motion. The PMS03 can be used indoors as well.

Specific Requirements:

2 - AAA Batteries, PAT01 - RF Base Transceiver Module

Optional / Supplementary Devices & Modules:

PHH02 - Chime, PLW01 - Wall Switch, PLM01 - Lamp Module

X10 Protocol:

House Code Dial - Letters A-P, Default "A" Unit Number Dial - Numbers 1-16, Default "1"

Each X10 Receiver Module is set to a unique Unit Number or to an identical Unit Number as desired.

Each X10 Controller operating a specific set of Receiver Modules must be set to the same House Code as the Receivers they are controlling.

Electrical Protocol:

Nearly all residential homes are wired SPLIT-PHASE. Each 120V Phase is NOT directly connected with the other 120V phase. If after installation, an X10 Receiver does not respond to a remote Controller, then check to ensure that the breaker serving the X10 Receiver is on the same phase as the Controller. If not, the breaker can be changed to the opposite phase. An alternative solution is recommended, to install a Phase Coupler for improving remote communications throughout the home. See www.x10pro.com, then select Technical Support and PLC Troubleshooting.

Installation:

Setting up the PMS03:

1.Remove the battery cover on the front of the PMS03 and install two AAA alkaline batteries. Initially the PMS03 defaults to House Code "A" and Unit Code "1" and defaults to See Motion, all the time (24hrs).

2.Plug-in an X10 PRO RF Base Transceiver (PAT01 - sold separately), set the House Code to "A".

3.Install or plug-in an X10 PRO Receiver Module, for Light Appliance control, and set the Receiver Module to House Code "A" / Unit Code "1".

Testing the PMS03:

1.Press the House button once, the PMS03 will transmit an RF X10 ON Command and the Red LED will flash.

2.Press the Unit button once, the PMS03 will transmit an RF X10 OFF Command and the Red LED will flash. (The default setting is "A1" ).

3.Place the Sensor on a shelf or mount it on a wall at least 6 feet above the ground and let it settle for at least 1 minute (default) with no motion before activation.

 

PMS03_03_03/07

Tampa, FL 33542

Technical Support: (800) 832-4003

 

Page 2
Page 1
Image 1
HomeTech PMS03 manual LED Motion Indicator Code Indicator Manual Off delay, Command Indicator After motion Green LED
Page 2

PMS03 specifications

The HomeTech PMS03 is a modern powerhouse designed for smart home enthusiasts and those looking to enhance their living experience with technology. This cutting-edge product seamlessly integrates into any home environment, providing enhanced functionality, usability, and comfort.

One of the main features of the HomeTech PMS03 is its advanced automation capabilities. With its intuitive smart scheduling system, users can set routines for their appliances, lighting, and climate control, allowing for a personalized living experience. This automation not only saves time but also enhances energy efficiency, as devices can be programmed to operate during off-peak hours, reducing electricity costs.

The PMS03 is equipped with state-of-the-art connectivity options, including Wi-Fi, Bluetooth, and Zigbee protocols. These connectivity features ensure that users can manage their devices remotely through a smartphone app or voice commands via popular digital assistants like Amazon Alexa or Google Assistant. This versatility allows for real-time control over home settings, ensuring that users can adjust their environment with ease and convenience.

In terms of design, the HomeTech PMS03 boasts a sleek, modern aesthetic that fits seamlessly into any décor. Its compact size allows for flexible placement throughout the home, whether on a countertop, shelf, or wall-mounted. The user-friendly interface features a responsive touchscreen display, making navigation simple and efficient.

Security is also a priority in the PMS03 model. With built-in encryption protocols and secure access controls, users can rest assured that their data and privacy are protected. Additionally, the PMS03 provides real-time monitoring and alerts for any unusual activity within the connected ecosystem, adding an extra layer of security for peace of mind.

Compatibility is a key characteristic of the HomeTech PMS03. It is designed to work with a wide range of smart home devices and appliances from various manufacturers, ensuring that users can create a cohesive and interconnected smart home environment without being limited to a specific brand.

In summary, the HomeTech PMS03 stands out with its advanced automation features, robust connectivity options, stylish design, strong security measures, and broad compatibility. This innovative home management system empowers users to create a smart living space tailored to their individual needs, making everyday tasks more effortless and enjoyable. With the PMS03, the future of smart living is at your fingertips.