Rinnai REU-VA3237FFU Operating Instructions, For Your Safety Read Before Operating

Page 37

Operating Instructions

FOR YOUR SAFETY READ BEFORE OPERATING

If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A.This appliance does not have a pilot. It is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

B.BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

OPERATING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Set the thermostat to lowest setting.

3.Turn off all electric power to the appliance using the ON/OFF button.

4.This appliance is equipped with an ignition device which automatically lights the burner. Do not try to light the burner by hand.

5.Locate the manual gas valve on the side of the heater. Turn the manual valve

clockwise to the full OFF position.

Manual Valve

CLOSE OPEN

6.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell

gas, STOP! Follow “B” in the safety information above. If you don,t smell gas, go to the next step.

7.Turn the manual gas valve counterclockwise to the

full ON position.

8.Turn on all electric power to the appliance using the ON/OFF button.

9.Set the thermostat to desired setting.

10.Open a hot water tap. If the appliance will not operate, follow the instructions “To Turn Off Gas To Appliance” and call your service technician or gas supplier. See manual for additional information.

TO TURN OFF GAS TO APPLIANCE

1.Turn off all electric power to the appliance using the ON/OFF button.

2.Set the thermostat to lowest setting.

3.Locate the manual gas valve on the side of the heater. Turn the manual valve clockwise to the full

OFF position.

VA Series Indoor LS Manual

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents ANS Z21.10.3 CSA REU-VA3237FFUTable of Contents R98LSi SpecificationsSafety Definitions Consumer Safety InformationSafety Behavior and Practices Safety Features Features Features Available on Remote ControllersDescription of Operation Operating InstructionsMC-91-1US & MCC-91-1US Remote Controllers ModelsBC-100V-1US Temperature Options Without a Remote Controller Setting the TemperatureSetting the Sound Volume Voice Prompt Temperature RangesSetting the Clock Model Temperature Settings Available ºFSetting the Water Volume Using the Water Smart / Bath Fill FunctionOverview Filling the Tub Setting Controller to MuteModels MC-91 and MCC-91 Maintenance Error Code Table Error CodesError Fault Remedy Code Accessing Operating Information Trouble Shooting for Common IssuesWater Quality Rinnai Water Heater Flushing the Heat Exchange Error Code LC orGeneral Instructions Installation InstructionsAttachment of the Water Heater Clearances from ApplianceGas Piping Electrical ConnectionGeneral Instructions Pipe Sizing Procedure Example Pressure Relief Valve Water PipingFreeze Protection Rinnai Water Heater Freeze Protection PipingQTY Recommended Piping for Basic InstallationFor this application Recommended Piping for Circulation SystemsYears On Heat Exchanger Years On Parts Optional Piping for Circulation SystemsIntake / Exhaust Guidelines Venting InstructionsCondensate Maximum Vent Length Manufacturer Product Parts Vent ProductsTermination Flue Terminal Clearances ANS Z21.10.3 CSA Area Where Bterminal is not PermitttedInside Corner Additional Clearances Vent TerminalFlue Installation Concentric Venting R50LSi, R75LSi, R94LSi Air Intake Assembly Flue Installation R98LSi, R98LSi-ASMEExhaust Pipe Assembly Venting Clearances to CombustiblesVertical Terminations Horizontal with Concentric TerminationConnecting Multiple Water Heaters High Altitude InstallationsNumber of Connected Water Heaters Accessories Necessary GuidelinesConfigurations Remote Controller InstallationLocation Cable Lengths and SizeSecuring screw Wiring hole 21/32 Operating Instructions For Your Safety Read Before OperatingPressure Drop Curve Technical DataOutlet Flow Data Space Heating R50LSi, R75LSi, R94LSi R98LSi, R98LSi-ASME DimensionsHOT Ladder DiagramLimited Warranty Warranty InformationConsumer Support VA LS Series Period of Coverage from date of purchaseWhat will Rinnai do? Rinnai’s other fine products 103 International Drive

REU-VA3237FFU specifications

The Rinnai REU-VA3237FFU is a high-efficiency gas continuous flow water heater designed to provide instant hot water on demand. It is particularly well-suited for households that require a reliable source of hot water while maximizing energy savings. This unit boasts impressive features that set it apart in the market, catering to both residential and commercial applications.

One of the standout characteristics of the REU-VA3237FFU is its energy-efficient design. With an impressive energy factor of 0.89, this model delivers exceptional performance, maximizing energy use and minimizing waste. The continuous flow technology means that there is virtually no wait time for hot water, making it ideal for busy households with multiple points of use.

The REU-VA3237FFU employs advanced temperature control technology. It features an intelligent digital controller that allows users to easily set their desired water temperature. This ensures consistent delivery of hot water at the desired temperature, enhancing comfort while also promoting safety by reducing the risk of scalding. The model also incorporates a safety lock function that can prevent accidental changes to the temperature setting.

In terms of durability and design, the Rinnai REU-VA3237FFU showcases high-quality build materials that contribute to its longevity. The stainless steel heat exchanger is resistant to corrosion, ensuring a long life expectancy and reliable performance over time. Additionally, the compact design makes it easy to install in tight spaces, whether indoors or outdoors, adapting to various installation environments.

Moreover, the Rinnai REU-VA3237FFU features a low NOx emission system, aligning with environmental standards and regulations. This eco-friendly technology makes it an excellent choice for environmentally conscious consumers looking to reduce their carbon footprint while enjoying the benefits of modern hot water systems.

The Rinnai REU-VA3237FFU is also equipped with a self-diagnostic system, which allows for easier maintenance and troubleshooting. This feature increases the unit's reliability by monitoring its performance and alerting users to any potential issues before they develop into significant problems.

In summary, the Rinnai REU-VA3237FFU is a standout continuous flow water heater that combines energy efficiency, durability, and advanced technology. With its smart temperature control, compact design, and environmentally friendly features, it is an outstanding choice for anyone seeking a dependable and efficient hot water solution.
Top Page Image Contents