Installation Instructions

Only properly trained and qualified installers should install this appliance. The warranty may be voided due to improper installation or installation by a non- qualified installer.

Rinnai highly recommends all installers attend a product knowledge class. For information on a Rinnai Training Course or for questions on installation call

1 800-621-9419.

R50LSi	REU-VA2019FFUD
R75LSi	REU-VA2528FFUD(A)
R94LSi	REU-VA2535FFUD
R98LSi	REU-VA3237FFU
R98LSi-ASME	REU-VA3237FFU-ASME

General Instructions

Do not use substitute materials.

Use only parts certified with the appliance.

•This appliance must be installed by a state qualified or licensed contractor. It is the responsibility of the person having the water heater installed to ensure the installing contractor has proper licenses and permits for installing water heaters in your location. Rinnai highly recommends that installers attend a product knowledge class to ensure customer satisfaction and warranty coverage. Failure to comply with state and local codes pertaining to water heater installations may void the warranty.

•This appliance is not to be installed outdoors.

•A qualified installer or service technician should install the appliance, inspect it, and leak test it before use.

•The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1.

•The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1.

•The appliance and its appliance main gas valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.5 kPa) (13.84 in W.C.).

•The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.5 kPa) (13.84 in W.C.).

•Follow the installation in structions and those in Maintenance for adequate combustio and ventilation air.

•The appliance should be located in an area where water leakage of the unit or connections will not result in damage to the area adjacent to the appliance or to lower floors of the structure. When such locations cannot be avoided, it is recommended that a suitable drain pan, adequately drained, be installed under the appliance. The pan must not restrict combustion air flow.

•The flow of combustion and ventilation air shall not be obstructed.

•This appliance is not suitable for use in an application such as a pool or spa heater that uses chemically treated water . (This appliance is suitable for filling large or whirlpool bath tubs with potable water.)

•If a water heater is installed in a closed water supply system, such as one having a backflow preventer in the cold water supply line, means shall be provided to control thermal expansion. Contact the water supplier or local plumbing inspector on how to control this situation.

•Should overheating occur or the gas supply fail to shut off, turn off the manual gas control valve to the appliance.

•Keep the air intake location free of chemicals such as chlorine or bleach that produce fumes. These fumes can damage components and reduce the life of your appliance.

VA Series Indoor LS Manual

REU-VA3237FFU specifications

The Rinnai REU-VA3237FFU is a high-efficiency gas continuous flow water heater designed to provide instant hot water on demand. It is particularly well-suited for households that require a reliable source of hot water while maximizing energy savings. This unit boasts impressive features that set it apart in the market, catering to both residential and commercial applications.

One of the standout characteristics of the REU-VA3237FFU is its energy-efficient design. With an impressive energy factor of 0.89, this model delivers exceptional performance, maximizing energy use and minimizing waste. The continuous flow technology means that there is virtually no wait time for hot water, making it ideal for busy households with multiple points of use.

The REU-VA3237FFU employs advanced temperature control technology. It features an intelligent digital controller that allows users to easily set their desired water temperature. This ensures consistent delivery of hot water at the desired temperature, enhancing comfort while also promoting safety by reducing the risk of scalding. The model also incorporates a safety lock function that can prevent accidental changes to the temperature setting.

In terms of durability and design, the Rinnai REU-VA3237FFU showcases high-quality build materials that contribute to its longevity. The stainless steel heat exchanger is resistant to corrosion, ensuring a long life expectancy and reliable performance over time. Additionally, the compact design makes it easy to install in tight spaces, whether indoors or outdoors, adapting to various installation environments.

Moreover, the Rinnai REU-VA3237FFU features a low NOx emission system, aligning with environmental standards and regulations. This eco-friendly technology makes it an excellent choice for environmentally conscious consumers looking to reduce their carbon footprint while enjoying the benefits of modern hot water systems.

The Rinnai REU-VA3237FFU is also equipped with a self-diagnostic system, which allows for easier maintenance and troubleshooting. This feature increases the unit's reliability by monitoring its performance and alerting users to any potential issues before they develop into significant problems.

In summary, the Rinnai REU-VA3237FFU is a standout continuous flow water heater that combines energy efficiency, durability, and advanced technology. With its smart temperature control, compact design, and environmentally friendly features, it is an outstanding choice for anyone seeking a dependable and efficient hot water solution.