Rinnai 26i, HD50i user manual Important Information

Page 14

IMPORTANT INFORMATION

Excessively hot water is dangerous, especially for young children and the infirm. The water heater allows you to control the temperature of your hot water to safe levels.

Water temperature over 50ºC can cause severe burns instantly or even death from scalding.

Children, disabled and the elderly are at the highest risk of being scalded by excessively hot water.

Always test the temperature of the water before bathing or showering.

Burns from hot water taps can result in very severe injuries to young children.

Hot water at 65°C can severely burn a child in less than half a second. At 50°C it takes five minutes.

Burns can occur when children are exposed directly to hot water or when they are placed into a bath which is too hot.

Do stay with children whenever they are in the bathroom.

 

•

Consider child—resistant taps

 

Do take them out of the bathroom if

or inexpensive tap covers,

 

you need to answer the phone or

both of which prevent a child’s

 

door.

hand from turning on the tap.

 

Do test the temperature of the water •

Consider reducing the

 

with your elbow before placing your

temperature of the water sup-

 

child in the bath.

plied to the hot tap to 500C.

DO

Do make sure that the tap is turned

This approach can be extremely

 

off tightly.

valuable because it requires a

 

Do consider setting your Rinnai

one time action for a long term

 

reduction in risks of scalds.

 

Infinity or HD50i at a maximum

This type of automatic protection

 

temperature of 500C.

is important during times when a

 

Do install a child proof tap cover

parent or carer has been

 

distracted.

 

OR,

 

 

Do install a child resistant tap.

 

DO

NOT

Do not leave a toddler in the care of another small child. The older child may not have safely set the temperature.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Infinity 26i and HD50i Rinnai UK Warranty from Jan Standard UseContents Unit Mounting Fasteners Quantity Description Remote Control PartsUnpacking Rinnai Water Heater Installation Instructions Important InformationInstallation Instructions Positioning Appliance LocationInstallation Instructions Ventilation General InformationWater Connection Installation Instructions ConnectionsWater Supply Gas ConnectionFlue Requirements Positioning Flue Requirements Installing GeneralDimensions Technical Details Infinity HD50iFeatures and Benefits Operating Noise Level is Very LOWImportant Information OFF Operation Without Remotes Turn On by opening the hot water tapTemperature Controls General Temperature Controls Installation Universal Temperature ControllerConnecting Four Controllers Connecting One or Two ControllersConnecting Three Controllers Temperature Controls Temperature Controls Operating Using 1 Universal Temperature Controller Adjusting TemperatureUsing hot water Using 2 or more Universal Temperature ControllersSwitching the system on Bathroom temperatures should be no more than 500CUsing 4 Universal Temperature Controllers StepUsing High Temperature Display Controllers Additional safety features To turn off your hot water systemTemperature Controls Information Testing GAS Pressure Setting LPGMbar LPGDIP Switch Setting Dip Switch Positions ExplainedTemperatures With or Without Remotes Connected Temperatures Remotes ConnectedError Messages Code Fault Remedy DisplayedWithout temperature controller fitted Installations with circulation pumpsWith temperature controller fitted Restarting the Rinnai Water Heater Standard systemWiring Diagram Diagnostic Points Specification Electrical Supply…………………………….…………..…………….….230V AC 50Hz 1phService Contact Commissioning Check List

26i, HD50i specifications

The Rinnai 26i and HD50i are two high-efficiency heating solutions designed to meet modern demands for comfort, convenience, and energy saving. These units are ideal for residential heating applications, delivering reliable warmth while also being mindful of environmental impacts and energy consumption.

The Rinnai 26i is a wall-mounted unit that offers exceptional performance and efficiency. With a compact design, it is perfect for both small and large spaces, making it versatile in various settings. One of the standout features of the 26i is its ability to provide continuous hot water and space heating simultaneously, making it exceptionally convenient for homeowners. The advanced modulation technology allows the unit to adjust its heating output based on demand, ensuring optimal comfort without excessive energy use.

Another notable aspect of the Rinnai 26i is its intelligent control system, which includes a user-friendly digital display and programmable thermostat. This allows homeowners to customize their heating schedules and maintain their preferred temperature with ease. Additionally, the unit is equipped with a range of safety features, including anti-frost protection, ensuring safe operation even in extreme weather conditions.

On the other hand, the Rinnai HD50i is designed for larger spaces and offers an impressive heat output. This gas heater features a stylish design, blending seamlessly with modern home aesthetics. The HD50i utilizes Rinnai's innovative convection technology, which effectively warms the room by circulating heated air, providing consistent comfort throughout the space.

The HD50i is also equipped with advanced airflow management systems that minimize hot and cold spots, ensuring even distribution of heat across various rooms. Both the 26i and HD50i models come with energy-efficient ratings that help reduce utility bills while lowering carbon footprints.

Ease of installation and maintenance is another advantage of both units; they are designed for straightforward setup and come with clear guidelines for servicing. This focus on user experience makes Rinnai heating systems a popular choice among homeowners.

In summary, the Rinnai 26i and HD50i represent the culmination of innovative heating technology, efficiency, and aesthetics. With their advanced features, environmental consideration, and user-friendly operation, these units stand out as top choices for efficient home heating solutions. Whether for a compact apartment or a spacious home, Rinnai provides versatile and reliable options for creating a warm, comfortable living environment.
Top Page Image Contents