Site Requirements

INSTALLATION INSTRUCTIONS

1.FLUE AND CHIMNEY REQUIREMENTS

1.1The chimney or flue system must comply with the rules in force and must be a minimum of 127mm in diameter. (5").

1.2The minimum effect height of the flue or chimney must be 3 metres (10ft). Any horizontal flue run from the rear outlet should not exceed 100mm from the back of the appliance.

1.3The chimney or flue must be free from any obstruction. Any damper plates should be removed or secured in the fully open position and no restrictor plates should be fitted.

1.4The chimney should be swept prior to the installation of the appliance. However, where it can be seen that the chimney is clean and unobstructed throughout its entire length, it need not be swept.

NOTE: If it is intended to fit the stove into a existing brick built chimney without a closure plate, a 5" (127mm) liner must be used. Larger lined flues may work, but in some instances could cause cold start flue problems resulting in nuisance shutdown. Lined flues above 7" (175mm) are not recommended.

Due to recent changes to European chimney standards, new flues and chimneys are now described by their temperature, pressure and resistance to corrosion, condensation and fire. To assist in identifying the correct flue system, the minimum flue specification is shown in the technical specification of this book. Existing chimneys are not covered by this system.

NOTE: THIS APPLIANCE IS NOT APPROVED FOR CLOSURE PLATE INSTALLATIONS

2.VENTILATION

2.1Consult the rules in force.

Note: This appliance does not normally require any additional ventilation when installed in G.B.

3.INSTALLATION OF THE GAS SUPPLY

3.1Before installation, ensure that the local distribution conditions (identification of the type of gas and pressure) and the adjustment of the appliance are compatible.

3.2Ensure that the gas supply is capable of delivering the required amount of gas and is in accordance with the rules in force.

3.3Soft copper tubing and soft soldered joints can be used but must not be closer than 50mm to the base of the tray.

3.4A means of isolating the gas supply to the appliance must be provided independent of any appliance control.

3.5All supply gas pipes must be purged of any debris that may have entered prior to connection to the appliance.

4.APPLIANCE LOCATION

4.1This appliance must stand on a non-combustible hearth that is at least 12mm thick, and project a minimum of 50mm from the base of the stove in all directions. The minimum dimensions are shown in diagram 1.

AR0604

4.2This appliance must not be installed in a room that contains a bath or shower.

4.3This stove is not suitable for installation against a combustible wall; all combustible materials must be removed from the area behind the stove.

4.4Ensure that all minimum clearances to combusible materials are complied with. See diagram 2.

AR0509.2

AR0531b

NOTE: IN A NON-COMBUSTIBLE RECESS ATTENTION MUST BE GIVEN TO ALLOWING ADEQUATE CLEARANCE AT THE SIDES AND REAR OF THE STOVE, SO THAT A SPILLAGE TEST CAN BE PERFORMED AND THE CONTROLS REACHED.

Gazco Ceremica Log Effect Stove Range specifications

The Stovax Gazco Ceramica Log Effect Stove Range is a perfect blend of modern design and traditional aesthetics, making it an ideal choice for homeowners looking to add warmth and charm to their living spaces. This range features a stunning log effect that mimics the look of real wood burning, providing the cozy ambiance of a traditional fireplace without the hassle of wood maintenance.

One of the standout features of the Ceramica Log Effect Stove is its advanced technology. The stove utilizes a highly efficient combustion system that maximizes heat output while minimizing emissions. This means that not only does it provide a welcoming warmth, but it also adheres to strict environmental standards, making it an eco-friendly heating choice. The range is designed to be compatible with various fuel types, including gas and electric, which allows for versatility in installation and operation.

The Ceramica range is characterized by its stylish ceramic exterior, available in a variety of colors and finishes. This modern design allows it to fit seamlessly into any home decor, from contemporary to rustic. The ceramic material not only enhances the visual appeal but also helps retain heat for extended periods, ensuring a lasting warmth throughout the room.

Moreover, the Ceramica Log Effect Stove is equipped with a powerful heat distribution system. This guarantees efficient warmth throughout the space, eliminating cold spots and providing a comfortable environment. The stove’s large viewing window offers an unobstructed view of the realistic flame effect, creating an inviting and soothing atmosphere.

User-friendliness is another key aspect of this stove range. It features intuitive controls and convenient design elements, allowing for easy operation and maintenance. The stove can be adjusted to suit individual preferences, and its automatic ignition system ensures a hassle-free start every time.

In conclusion, the Stovax Gazco Ceramica Log Effect Stove Range combines aesthetic elegance with cutting-edge technology. Its efficient heat output, eco-friendly operation, and distinctive design make it an outstanding choice for anyone looking to elevate their home’s heating solution while enhancing its visual charm. With its myriad of features and style, the Ceramica Log Effect Stove stands as a testament to quality and innovation in modern heating design.