Premier Mounts RFM, Rotary series installation instructions Table of Contents

Page 2

RFM

 

Table of Contents

Contact Premier Mounts

2

Warning Statements

3

Parts List

4

Installation Tools

4

Thread Depth Indicator

7

Mount Installation

8

Concrete Mounting

9

Universal Mounting Bracket Installation

9

Display Orientation

11

Technical Specifications

11

Warranty

12

Warning Statements

 

 

 

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND

 

 

 

COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL

 

 

 

 

 

 

INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE

 

 

 

LOCATION FOR FUTURE REFERENCE.

 

 

 

PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS

 

 

 

PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY

 

 

 

UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS,

 

 

 

DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR

 

 

 

IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.

 

 

 

THE SURFACE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE DISPLAY. IF NOT,

 

 

 

THE SURFACE STRUCTURE MUST BE REINFORCED. THE MAXIMUM WEIGHT THAT CAN BE USED WITH THIS

 

 

 

PRODUCT IS 160LBS. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED

 

 

 

IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS

 

 

 

PERSONAL INJURY, OR EVEN DEATH.

 

 

 

SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE

 

 

 

PROPER SAFETY GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.

 

 

 

At least two qualified people should perform the assembly procedure. Injury and/or damage can result from dropping or mishandling

 

 

 

the display.

 

 

 

If mounting to studs, make sure that the mounting screws are anchored into the center of the studs. Use of an edge-to-edge stud finder

 

 

 

is recommended.

 

 

 

Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are no elec-

 

 

 

trical wires in wall. Cutting/drilling into an electrical line may cause serious injury.

 

 

 

Make sure there are no water lines inside the wall where the mount is to be located. Cutting/drilling into a water line may cause

 

 

 

severe water damage to the mounting surface.

 

 

 

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

 

 

 

Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact

 

 

 

Contact Premier Mounts with any questions

 

 

 

(800) 368-9700

 

 

 

techsupport@mounts.com

 

 

Page 2

Installation Instructions

Image 2
Contents Installation Instructions Table of Contents Parts List Installation ToolsM4 x Qty M6 x M5 x M8 x Qty Thread Depth Indicator Mount Installation Step Universal Mounting Bracket Assembly Concrete MountingInstallation Instructions Technical Specifications Display OrientationWhat Premier Mounts Will Do WarrantyWhat Customers Must Do for Limited Warranty Service How State Law Applies