RFM
6. Lower the universal bracket bar with attached display into the cradle (as shown to the left).
Nylon
Sleeve
After loosening the tension bolts, be sure that the nose piece is held together tightly before rotating.
Knurl Knob Mounting Point/M6 x 12mm Security Head and
M6 Lock Washer Mounting Point.
7. Insert an M6 Knurl Knob/M6 x 12mm Security Head and M6 Lock Washer into the knurl knob/ security screw mounting point and tighten.
To access the knurl knob/security screw location while the display is attached, the RFM must be rotated to the “portrait” position (vertical position
8. Tighten the two (2) Phillips head screws (located on the side of the mounting block) once the final position is attained.
Installation Instructions | Page 9 |