Attaching Adapter Plate to Screen | fig. 4.1 | |
4 | Attaching adapter plate to screen with | |
VESA hole pattern: |
| |
Choose hole pattern and fasteners shown in detail 2 for mounting screen with VESA mounting patterns. Hand thread screws (F, G or H) through washers (J or O) and adapter plate (B) into screen as shown in figure 4.1. Screw must make at least three full turns into the mounting hole and fit snug into place. Securely tighten screws.
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.
screen
B
F, G or H
J or O
| MOUNTING PATTERNS |
|
VESA® 100 x 100 | VESA® 200 x 100 | VESA® 200 x 200 |
M4 x 12 mm screws (F) with #8 | M4 x 12 mm screws (F) with | M5 x 12 mm screws (G) or |
washers (J) or M5 x 12 mm screws | washers (J), M5 x 12 mm screws (G) | M6 x 12 mm screws (H) with |
(G) with 1/4" washers (O) | or M6 x 12 mm screws (H) | 1/4" washers (O) |
| with 1/4" washers (O) |
|
DETAIL 2
Attaching adapter plate to dedicated adapter plates:
Using the hole pattern shown in detail 3, attach the adapter plate (B) to dedicated adapter plate with four M10 x 15 mm screws (I) as shown in figure 4.2. Tighten screws using 6 mm allen wrench (not included).
fig. 4.2
dedicated
Adapter plate
| Mounting pattern for |
B | dedicated adapter plates |
|
I
DETAIL 3
8 of 9 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call |