Peerless Industries DS508 manual Attaching Adapter Plate to Wall Plate, Accessing CPU

Page 9

Attaching Adapter Plate to Wall Plate

5

Thread two M8 x 15 mm screws (E) into bottom holes of wall plate (A) leaving 1/8" space between head of screw

and wall plate as shown in figure 5.1. Guide hook slots of adapter plate (B) onto screws (E), while supporting

weight of screen, align top holes of wall plate and adapter bracket to the desired tilt angle and secure with two M8 x 15 mm screws (E). Tighten all screws securely.

fig. 5.1

10° TILT

5° TILT

fig. 5.2

 

NO TILT

 

A

 

 

HOOK

 

 

 

SLOTS

 

E

 

 

 

 

 

1/8"

E

 

 

 

 

B

E SIDESBOTH

A

 

 

 

 

wall not shown for clarity

Accessing CPU

 

 

6

Loosen top two M8 x 15 mm screws (E) 1/4 turn and temporarily remove bottom two M8 x 15 mm screws (E) on

adapter plate (A) as shown in figure 6.1. Swing screen forward and swing support brackets downward into adapter

plate (B) to brace screen in open position as shown in figure 6.2.

E

B

fig. 6.1

Loosen 1/4 turn on both sides

fig. 6.2

AB

A

support brackets (both sides)

E remove

 

9 of 9

ISSUED: 03-05-09 SHEET #:125-9054-2 07-15-09

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

© 2008, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.

Image 9
Contents Model DS508 Installation and AssemblyTable of Contents Tools Needed for AssemblyDescription Qty Parts ListInstallation to Double Wood Stud Wall Correct Installation to Solid Concrete or Cinder BlockInstallation to Metal Studs Attach CPU to Wall Plate Placement of Adhesive StripsOr H Or O Attaching Adapter Plate to ScreenVesa 100 x Vesa 200 x Attaching Adapter Plate to Wall Plate Accessing CPU