Motor filter, Exhaust filter, Small motor filter

Motor filter:

The motor filter is a HEPA filter located inside the transparent container. When the quantity of dust and dirt has reached the MAX mark, do as follows:

Lift the dust container by the handle and take the container out of the vacuum cleaner. Empty the container by pressing the release button located at the bottom of the container. Then remove the motor filter in the container and tap it gently (we recommend that this is done while the filter is held in a bag).

Then brush the filter lightly with a small brush. This filter can also be washed in lukewarm water without washing-up liquid or detergent.

None of the filters needs to be washed in washing-up liquid or detergent.

The filter must not be used again until it is completely dry.

Once the container is empty, it should be replaced in the vacuum cleaner. It is locked by pushing the handle down.

Exhaust filter:

This micro-filter should also be cleaned regularly to maintain suction power. Press the release button on the filter container behind the vacuum cleaner. Remove the filter and clean it, or replace the filter.

Small motor filter:

The small motor filter is the round, detachable plastic filter located under the dust container. Brush off any dust from the small motor filter and clean from time to time using water and a mild detergent.