Marmitek SD10 owner manual Installation, Carry out the following steps

Page 5

Ensure that the smoke detector is not installed directly on or near large metal objects as they can affect the radio range.

Before installing the SD10 smoke detector on your ceiling or the wall, ensure that the SD10 is within range of your Marmitek security system. You can test this by pushing the test button of the SD10. The Marmitek security system should now be triggered and will dial the pre- programmed telephone numbers.

In the case of range problems, choose a different location for your SD10 smoke detector. Moving the SD10 just a few centimetres can make a big difference in range.

To avoid false alarms, do not install the SD10 smoke detector in your kitchen, garage, in dusty places, in places with a higher than average air flow (near ventilation, open windows), near metal and in places where the temperature is below 10˚C or above 37˚C.

5 INSTALLATION

Please follow these steps to install the Marmitek smoke detector:

•Do not insert the battery at this stage (9V). Please follow the steps of the next chapter before you insert the battery. The smoke detector will not operate until you insert the battery properly.

•Remove the mounting bracket from your unit by rotating it counter-clockwise.

•In each of the keyhole slots, draw a mark to locate a mounting plug and screw.

•Remove the bracket.

•Drill two holes at the marks and insert plastic wall plugs. Ensure that the detector does not get any plaster dust on it when you drill the holes for mounting.

•Attach the bracket to the wall using the two screws and plastic wall plugs (supplied)

•Line up the slot of the bracket and the detector. Push the detector onto the mounting bracket and turn it clockwise to fix it into place. Pull outward on the detector to make sure it is securely attached to the mounting bracket.

6.REGISTERING THE SMOKE DETECTOR WITH THE SC9000 BASE STATION OF THE SAFEGUARD / TOTALGUARD

Carry out the following steps:

1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.

2.Enter your 4-digit PIN code (factory setting 0000). For every digit entered, a * will appear on the display.

3.When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.

4.Press OK.

5.Insert the battery into the smoke detector (see the user manual of the smoke detector for more information). The console will beep to confirm. The display will read ‘RMOT x SET’.

SD10

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Relesswireless Smokesmok Etectordetector SD10SD1 Wireless Smoke Detector SD10 For use with Marmitek security systems of the types General Information and FunctionIntended USE Installation Places SAFETY- and MAINTENANCE- ReferencesCarry out the following steps InstallationCarry out the following steps Changing the address of the sensor Changing the Address of the Smoke DetectorChanging the Battery Final AssemblyFrequently Asked Questions Technical DataGeeignet für nachfolgende Marmitek-Sicherheitssysteme Drahtloser Rauchmelder SD10 GebrauchsanleitungAllgemeine Informationen UND Funktion SICHERHEITS- UND Wartungshinweise Installationsorte UND -HINWEISEAnwendungsbereich Befolgen Sie nachfolgende Anweisungen Befolgen Sie nachfolgende Anweisungen Die Adresse des Rauchmelders ändern DIE Adresse DES Rauchmelders ÄndernBatterie Auswechseln Installation BeendenOFT Gestellte Fragen Technische DatenGénéralités ET Fonction Détecteur DE Fumée Sans FIL SD10 Guide D’UTILISATIONUtilisation Prévue Utiliser avec des systèmes de sécurité Marmitek des typesRéférences DE Sécurité ET D’ENTRETIEN OÙ Installer LES Détecteurs DE Fumée ?« Entrer Code » Exécuter les étapes suivantesExécuter les étapes suivantes Changer l’adresse du capteur Changer L’ADRESSE DU Détecteur DE FuméeRemplacer LA Pile Assemblage Final12 F.A.Q Foire AUX Questions Données TechniquesAlgemene Informatie EN Werking Draadloze Rookmelder SD10 GebruikshandleidingGebruik De rookmelder heeft de volgende eigenschappenPlaatsen Veiligheid EN OnderhoudVolg de volgende stappen InstallatieVolg deze stappen om de Marmitek-rookmelder te installeren Volg de volgende stappen Het adres van de rookmelder wijzigen HET Adres VAN DE Rookmelder WijzigenVervangen VAN DE Batterij AfmonterenVeel Gestelde Vragen Technische InformatieDeclaration of Conformity

SD10 specifications

The Marmitek SD10 is an innovative device designed to enhance home entertainment systems through seamless HDMI signal transmission over a long range. This product stands out for its ability to deliver high-definition video and audio with superior quality, making it a favorite among home theater enthusiasts.

One of the key features of the Marmitek SD10 is its ability to support resolutions up to 1080p. This high-definition capability ensures that users can enjoy their favorite movies, games, and television shows in stunning clarity. The device operates on the principle of HDMI over Ethernet, allowing for transmission distances of up to 50 meters, which is impressive compared to traditional HDMI cables that typically have a limited range.

In terms of technology, the Marmitek SD10 utilizes advanced signal compression methods to maintain audio and video integrity over long distances. This ensures that there is minimal lag or distortion, providing a smooth viewing experience without interruptions. The unit is also equipped with a built-in Ethernet switch, which allows users to connect additional devices without needing extra cables.

Another notable characteristic of the SD10 is its plug-and-play design, which makes installation straightforward and hassle-free. Users can simply connect their source device, such as a Blu-ray player or gaming console, to the transmitter, and then connect the receiver to their display, be it a TV or projector. This user-friendly aspect makes it an ideal choice even for those who may not be tech-savvy.

The Marmitek SD10 also features infrared (IR) remote control capabilities, enabling users to operate source devices from the receiver location. This adds an extra layer of convenience, as users can control their media playback without needing to be physically near the equipment.

Additionally, the device is designed to be compatible with various HDMI formats, including 3D video support, ensuring that it meets the demands of modern multimedia content. Its robust build quality and reliable performance make it a worthwhile investment for anyone looking to enhance their home entertainment experience.

In summary, the Marmitek SD10 is a powerful HDMI extender that combines high-definition video and audio transmission with user-friendly features and advanced technology, making it an essential component for modern home theaters.
Top Page Image Contents