Marmitek RP835 Registering the Repeater to the Control Panel, LCD rogramming Keypad PK836

Page 4

Connect the Programming Keypad (PK836) to the Programming Keypad (PK836) connector.

Note: The Programming Keypad (PK836) is not able to operate on battery power only.

8.Test the repeater from the required mounting location before permanently mounting the unit.

9.Mount the base to the wall using four screws and replace the front cover.

When the tamper switch is open, the bi- color LED provides indication regarding repeater transmission and reception as an aid during the installation procedure

–see Table 1. When the tamper switch is closed, the bi-color LED provides indication regarding power status – see Table 2.

LED Indication

Description

Flashing Green

Signal Reception

Flashing Red

Signal Transmission

Table 1: LED Indication (Tamper Open)

 

 

LED Indication

Description

Steady Green

AC & Battery OK

Flashing Red

AC Loss

Flashing Orange

Low Battery

Table 2: LED Indication (Tamper Closed)

REGISTERING THE REPEATER TO THE CONTROL PANEL

For the control panel to recognize the repeater, you must register the repeater to the control panel.

To register the repeater to the control panel:

1.Set the control panel to Registration mode as follows:

•From the Programming menu, select Devices, Repeaters [914].

•Select the repeater you want to register (1-4).

•From the repeater’s sub-menu, select Register [#1].

2.Send two Status transmissions from the repeater as follows:

•On the Programming Keypad (PK836),

press until 5. STS Transmit appears on the display.

•Press 9.

•Press 9 again.

Figure 3: LCD rogramming

Keypad (PK836)

RP835 & PK836

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents RP835 Repeater Introduction Safety WarningsRP835 & PK836 Installation Registering the Repeater to the Control Panel LCD rogramming Keypad PK836Deleting Registered Transmitters Registering Transmitters to the RepeaterMarmitek TX List Installer UtilitiesTX Test RP835 Technical DataPK836 Sicherheitshinweise EinführungAbbildung 2 RP835 Frontteil entfernt DEN Verstärker AN DAS Control Panel Anmelden VerstärkerAnmeldung VON Alarmgebern IM Verstärker Angemeldete Alarmgeber LöschenInstallationshilfen TX ListeTechnischen Daten Avertissements DE Securite IntroducionSélectionnez Usage Répéteur RP835 couvercle ouvertEnregistrement DU Répéteur AU Panneau DE Controle Clavier Programmable LCD PK836Enregistrement DES Émetteurs AU Répéteur Utilitaires D’INSTALLATIONSuppression Émetteurs Enregistrés Liste EM Test EMCaractéristiques Techniques Avisos DE Seguridad IntroducciónInstalación Figura 2 RP835 tapa retiradaRegistro DEL Repetidor EN EL Panel DE Control Figura 3 Teclado de Programación LCD PK836Registro DE Transmisores EN EL Repetidor Borrar Transmisores RegistradosUtilidades DE Instalación Test TXEspecificaciones Técnicas Precauzioni DI Sicurezza IntroduzioneInstallazione Figura 2 RP835 senza coperturaRegistrazione DEL Ripetitore AL Pannello DI Comando Cancellare Trasmettitori Registrati Registrare Trasmettitori AL RipetitoreUtilità DI Installazione TX ListCaratteristiche Tecniche Veiligheidswaarschuwingen IntroductieInstallatie DE Repeater OP DE Centrale Unit Registreren Selecteer in het repeater sub-menu,Rep x geregistreerd #1Aanmelden VAN Zenders OP DE Repeater Geregistreerde Zenders VerwijderenZender overzicht Installatie FunctiesZender Test Technische Gegevens AaalDeclaration of Conformity Copyrights ZI0503A

PK836, RP835 specifications

Marmitek RP835 and PK836 are innovative solutions in the realm of home automation and remote control systems, catering to the growing demand for convenience and technological advancement in modern households. These devices enable seamless control over various electronic appliances, enhancing user experience and simplifying everyday tasks.

The Marmitek RP835 remote control is engineered with user-friendliness in mind. It features a sleek design with intuitive button layout, ensuring effortless navigation through its functions. Capable of operating multiple devices, including televisions, audio systems, and media players, it eliminates the clutter of numerous remote controls. One of the standout attributes is its programmable capability, which allows users to customize settings according to their preferences, thereby ensuring personalized use.

On the other hand, the Marmitek PK836 serves as a powerful transmitter and receiver set that excels in wireless communication. Utilizing advanced radio frequency technology, it ensures a stable connection with minimal interference, critical for the reliable operation of various home appliances. The PK836 supports a wide range of devices such as lights, fans, and other electronics that can be controlled remotely with ease.

A remarkable feature of these Marmitek devices is their integration with smart home systems. They can be connected to various smart home hubs, enabling voice control and advanced automation scenarios. This integration not only simplifies operation but also enhances energy efficiency by allowing users to schedule and monitor device usage.

In addition to their technological advantages, the RP835 and PK836 provide versatility and compatibility. They work with various models and brands, ensuring users have a broad scope of application across their existing electronic devices. Furthermore, the installation process is straightforward, allowing for a hassle-free setup that can be accomplished without professional assistance.

Overall, the Marmitek RP835 and PK836 are essential components for any smart home setup. Their user-centric design, advanced technology, and seamless integration with existing systems make them ideal choices for enhancing convenience and efficiency in daily home management. As homes continue to evolve toward more intelligent systems, products like the RP835 and PK836 pave the way for a more interconnected living experience.
Top Page Image Contents