Marmitek PK836, RP835 Registering Transmitters to the Repeater, Deleting Registered Transmitters

3.Confirm registration to the control panel as follows:

•When Save? appears on the control panel’s LCD display, press 9.

REGISTERING TRANSMITTERS TO THE REPEATER

You can register up to 32 transmitters to the RP835 repeater.

Note: Do not register the same transmitter to more than one repeater.

To register transmitters to the repeater:

1.On the LCD Programming Keypad (PK836), press until 4. TX Register appears on the display.

2.Press 9; New Device appears on the display.

3.Press 9 again; Transmit 1 appears on the display.

4.Send two transmissions from the device you want to register.

5.When the transmitter number and Save? appear on the display, press 9 to confirm registration.

Figure 4: Transmitter

Registration Procedure

Note: The RP835 repeater automatically allocates a transmitter number to each newly registered device. Write this number and the zone number on the sticker provided with the sensor and stick it inside the transmitter’s cover for future reference.

6.After you have confirmed registration, the display returns to New Device. Press 9 to register another device or 8 to exit Registration mode.

DELETING REGISTERED TRANSMITTERS

To delete transmitters from the repeater’s register:

1.On the LCD Programming Keypad (PK836), press until 3. TX Delete appears on the display.

2.Press 9; the first transmitter in the list appears on the display.

3. Use the arrow navigation keys ( / ) to scroll to the transmitter you want to delete.

4.Press 9 to select the transmitter.

5.Press 9 again for confirmation; the transmitter is deleted.

6.Select another transmitter to delete or press 8 to exit.

5

Figure 5: Delete

Transmitter Procedure

© MARMITEK