M-Audio DELTA 1010 manual Delta 1010 User Guide

Page 40

40

Delta 1010 User Guide

Problem: Clicks, pops, and other glitches in audio streams.

Possible Cause 1: Input levels are too loud and are resulting in clipping or distortion. Lower the source’s output level. If you are using a microphone preamplifier, reduce its gain to avoid overloading the interface. The meter display in the Control Panel can be used as a visual aid to help you set optimal input levels.

Note that the faders of the Monitor Mixer only affect the monitor mix and do not have any effect on the signal being recorded into your audio application.

Possible Cause 2: The Delta 1010 audio buffer size is set too low and must be increased. Each audio application handles buffer settings differently, but the options for changing buffer sizes are usually found under the program’s “setup” or “audio preferences” menus. Refer to your audio application’s documentation to learn how to increase buffer size.

TIP: Some audio applications require you to run a soundcard calibration routine (sometimes called “profiling”) the first time you use the software with a new audio card. This routine should automatically determine the optimum buffer size setting. If your computer’s hardware or software configuration has recently changed, try running the profiling routine again to see if this resolves the issue.

Possible Cause 3: If you have connected your Delta 1010 to other digital devices using S/PDIF or Word Clock connections, ensure that your clock sources have been configured properly. See the section entitled “Synchronization” earlier in this guide to learn more about this topic

Possible Cause 4: By default, Windows XP features a variety of graphical effects that improve the appearance of the operating system. These effects may adversely affect performance on older systems. Try turning off these visual effects to see if audio issues are resolved. In Windows XP, go to Start

>Settings > Control Panel > System. Select the Advanced tab and click the “Setting” button under Performance. Select “Adjust for best performance” from the window that appears.

Possible Cause 5: Under Windows XP, some accelerated graphics cards use excessive amounts of system bandwidth, preventing the recording buffer of an audio card from keeping up with demand. This can cause clicks in the audio streams. Reducing or turning off the graphics card’s graphics acceleration feature often resolves this problem. In Windows XP, go to Start > Settings > Control Panel > Display. Select the Settings tab and click the Advanced button. Select the Troubleshoot tab and set the “Hardware acceleration” slider to “None.”

Page 39 Page 41
Image 40
Page 39 Page 41
Contents User Guide Table of Contents Introduction What’s in the Box?About the Delta Digital Recording System Product Features & Specifications Minimum System Requirements Hardware Controls and IndicatorsRack Unit Front Panel Rack Unit Back Panel PCI Host Adapter Card Delta 1010 User Guide Analog Inputs/Outputs Delta System OverviewDigital Monitor Mixer Patchbay / Router SynchronizationUsing Delta 1010 with your Audio Software Audio InputsAudio Outputs Display Name Corresponding OutputsDelta Control Panel for Windows XP Control Panel SoftwareMonitor Mixer Tab Delta 1010 User Guide Delta 1010 User Guide Patchbay/Router Tab Hardware Settings Tab Delta 1010 User Guide Delta 1010 User Guide Delta 1010 User Guide Pdif Tab Delta 1010 User Guide Delta 1010 User Guide Bass Management Tab Additional Control Panel Features About TabControl Panel Software for Mac OS Monitor Mixer TabDelta 1010 User Guide Delta 1010 User Guide Patch Bay Tab Hardware Settings Tab Delta 1010 User Guide Pdif Tab Output Format Consumer Advanced Settings Output Format Professional Advanced Settings Additional Control Panel Features About TabDelta 1010 User Guide Troubleshooting Problem No soundDelta 1010 User Guide Delta 1010 User Guide Technical Specifications Analog AudioTechnical Info Appendix Appendix a ClockingWarranty Terms and Registration Warranty Terms Warranty Registration070208Delta1010UGEN01

DELTA 1010 specifications

The M-Audio Delta 1010 is a highly regarded audio interface that has become a staple in many professional and home studios since its introduction. Known for its reliable performance and excellent sound quality, the Delta 1010 offers a range of features that cater to musicians, producers, and sound engineers alike.

One of the standout features of the Delta 1010 is its connectivity. This interface includes 10 inputs and 10 outputs, providing ample flexibility for recording and playback. It features eight analog inputs and outputs, which enable users to connect multiple instruments and studio gear simultaneously. In addition to the analog connections, the Delta 1010 also boasts digital I/O options via S/PDIF and ADAT Optical, allowing users to integrate it with other digital equipment seamlessly.

The audio quality of the Delta 1010 is another key attraction. With a 24-bit resolution and a sample rate of up to 96 kHz, the interface delivers crystal-clear audio, making it suitable for high-fidelity recording and mixing. The low latency performance is crucial for real-time monitoring during recording sessions, ensuring that musicians can perform without any noticeable delay.

In terms of build quality, the M-Audio Delta 1010 is designed for durability and reliability. Its sturdy construction ensures it can withstand the rigors of daily studio use. The interface also features a user-friendly layout with clear labeling, making it easy for users to navigate and connect their equipment.

The Delta 1010 is compatible with various digital audio workstations (DAWs) and supports multiple operating systems, including Windows and macOS. This versatility makes it an ideal choice for users who may need to switch between different platforms.

Additionally, the M-Audio Delta 1010 comes with a comprehensive software package, which often includes drivers and various digital audio tools. This software integration streamlines the setup process and enhances the overall user experience.

In summary, the M-Audio Delta 1010 stands out in the realm of audio interfaces with its robust features, including multiple input/output options, high-quality audio performance, and user-friendly design. Whether for professional studio work or home recording, the Delta 1010 continues to be a trusted choice for those seeking a reliable and versatile audio interface.
Top Page Image Contents