M-Audio DELTA 1010 manual Bass Management Tab

Page 25

Delta 1010 User Guide

25

<PROFESSIONAL FORMAT ADVANCED SETTINGS: The following settings appear when “Professional” has been selected in the Digital Output Format section and the Advanced Settings box has been checked:

•Data Type: This parameter toggles a bit in the outgoing S/PDIF data stream that indicates whether the signal is “audio” or “non-audio.” In most cases, this parameter should be left in its default “audio” state. One exception to this is if you are sending Dolby Digital or AC-3 encoded signals to a home-theater receiver or other surround decoding device.

Dolby Digital and AC-3 are technically considered to be “non-audio” signals and some decoders will ignore a S/PDIF signal if this bit is not set correctly. Note that most modern DVD player applications automatically set this parameter to its correct setting and you will not have to make any changes to the Data Type setting.

•Emphasis: This parameter lets you indicate if pre-emphasis has been applied to the outgoing digital audio signal. In most cases, the default “Not Indicated” setting will apply unless the outgoing audio has been encoded with “50/15 µsec” or “CCITT” pre-emphasis.

Bass Management Tab

The Bass Management tab allows you to take control over Delta 1010’s Home Theater related features such as crossover frequency settings, LFE routing options, speaker distance settings, etc.

Please download the Delta Bass Management Addendum from the M-Audio website at www.m-audio.com for a full description of the features available in this tab.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents User Guide Table of Contents What’s in the Box? IntroductionAbout the Delta Digital Recording System Product Features & Specifications Minimum System Requirements Hardware Controls and IndicatorsRack Unit Front Panel Rack Unit Back Panel PCI Host Adapter Card Delta 1010 User Guide Analog Inputs/Outputs Delta System OverviewDigital Monitor Mixer Synchronization Patchbay / RouterAudio Inputs Using Delta 1010 with your Audio SoftwareDisplay Name Corresponding Outputs Audio OutputsDelta Control Panel for Windows XP Control Panel SoftwareMonitor Mixer Tab Delta 1010 User Guide Delta 1010 User Guide Patchbay/Router Tab Hardware Settings Tab Delta 1010 User Guide Delta 1010 User Guide Delta 1010 User Guide Pdif Tab Delta 1010 User Guide Delta 1010 User Guide Bass Management Tab About Tab Additional Control Panel FeaturesMonitor Mixer Tab Control Panel Software for Mac OSDelta 1010 User Guide Delta 1010 User Guide Patch Bay Tab Hardware Settings Tab Delta 1010 User Guide Pdif Tab Output Format Consumer Advanced Settings Output Format Professional Advanced Settings About Tab Additional Control Panel FeaturesDelta 1010 User Guide Problem No sound TroubleshootingDelta 1010 User Guide Delta 1010 User Guide Analog Audio Technical SpecificationsTechnical Info Appendix a Clocking AppendixWarranty Terms Warranty Registration Warranty Terms and Registration070208Delta1010UGEN01

DELTA 1010 specifications

The M-Audio Delta 1010 is a highly regarded audio interface that has become a staple in many professional and home studios since its introduction. Known for its reliable performance and excellent sound quality, the Delta 1010 offers a range of features that cater to musicians, producers, and sound engineers alike.

One of the standout features of the Delta 1010 is its connectivity. This interface includes 10 inputs and 10 outputs, providing ample flexibility for recording and playback. It features eight analog inputs and outputs, which enable users to connect multiple instruments and studio gear simultaneously. In addition to the analog connections, the Delta 1010 also boasts digital I/O options via S/PDIF and ADAT Optical, allowing users to integrate it with other digital equipment seamlessly.

The audio quality of the Delta 1010 is another key attraction. With a 24-bit resolution and a sample rate of up to 96 kHz, the interface delivers crystal-clear audio, making it suitable for high-fidelity recording and mixing. The low latency performance is crucial for real-time monitoring during recording sessions, ensuring that musicians can perform without any noticeable delay.

In terms of build quality, the M-Audio Delta 1010 is designed for durability and reliability. Its sturdy construction ensures it can withstand the rigors of daily studio use. The interface also features a user-friendly layout with clear labeling, making it easy for users to navigate and connect their equipment.

The Delta 1010 is compatible with various digital audio workstations (DAWs) and supports multiple operating systems, including Windows and macOS. This versatility makes it an ideal choice for users who may need to switch between different platforms.

Additionally, the M-Audio Delta 1010 comes with a comprehensive software package, which often includes drivers and various digital audio tools. This software integration streamlines the setup process and enhances the overall user experience.

In summary, the M-Audio Delta 1010 stands out in the realm of audio interfaces with its robust features, including multiple input/output options, high-quality audio performance, and user-friendly design. Whether for professional studio work or home recording, the Delta 1010 continues to be a trusted choice for those seeking a reliable and versatile audio interface.
Top Page Image Contents