Camera Operation & Installation

Power ON/OFF

To turn ON the camera unit, press the ON/OFF button located at the front of the camera (18) for about 1 second or until back lighting of the switch is turned on.

CAMERA MODES:

Voice Activation Mode (VOX)

Voice Activation (VOX) mode allows your camera to go to sleep when there is no sound in the room. The monitor will automatically turn on when the camera detects noise– subject to the preset sound level. This feature allows you to con- serve battery power.

NOTE: The Monitor will automatically display “NoLink/VOX” on screen if no signal is received from the Camera.

To Activate slide the VOX switch (22) to the “ON” position on the Camera. When the sound level reaches the preset level within the surrounding area, the Camera will begin transmitting the image and sound to the Monitor.

To Deactivate slide the VOX switch (22) to the “OFF” position on the Camera. The camera will then transmit picture and sound continuously.

Infrared Night Vision Mode (Automatic)

The infrared night vision mode will switch on automatically during darkness or periods of low light levels. In this mode only monochromatic images will be displayed on the monitor.

Nightlight Mode

The camera features a handy glowing nightlight around the front edge. To chose the preferred nightlight setting slide the Nightlight Mode Switch (21) on the camera bottom to the desired indicator:

ON – The Nightlight will be turned on and remain on continuously.

AUTO – The Nightlight will be set to turn on automatically whenever the cam- era senses low levels of light. The Nightlight will automatically turn off when the camera again senses sufficient light in the area.

OFF – The Nightlight will always remain off.

Note: When the nightlight is set to AUTO, the automatic Night Vision light level feature determines when the nightlight switchs on and off.