Mobi Technologies 70062 manual Troubleshooting, Problem Normal Solutions

Page 14

Troubleshooting

PROBLEM

 

NORMAL SOLUTIONS

 

 

 

 

Screen turns on and off

• The “VOX” mode is selected on the camera,

 

 

when there is no noise detected by the camera

 

 

it stops transmitting to save power. To turn off

 

 

select “OFF” under the “VOX” settings

 

 

switch.

No reception at Monitor

Unit has not been switched on.

 

 

• AC/DC adaptor has not been connected.

 

• Adjust the position of the Camera or Monitor.

 

• No Battery Power (check LED indicator)

 

The transmitter may not be transmitting.

 

 

(either not powered on or in VOX mode)

 

• Wrong Channel is selected on Monitor

No picture display but can

Check if the LCD on/off switch.

 

hear sound

• Low Power (Check the LED indicator)

 

Check to make sure units are linked properly

Only Black & White picture

Check if transmitter has switched to night

 

displayed

 

vision mode.

Batteries cannot be recharged

• AC/DC adaptor has not been connected.

 

 

Non-rechargeable battery has been used.

 

Only special designed rechargeable batteries

 

 

can be recharged. Please contact the manufac-

 

 

turer if you have any questions.

Camera will not link

Unit has not been switched on.

 

 

• AC/DC adaptor has not been connected.

 

• Check to make sure you are making contact

 

with the link button.

 

Check to make sure you are selecting the cor

 

 

rect channel

Channels Keep Switching

• Check to make sure you are not in scan mode

.

Back and Forth

 

To stop this feature use the channel selection

 

 

switch on the monitor and select the desired

 

 

channel

 

12

Image 14
Contents 70062 Table of Contents Package Contents IntroductionFeatures FCC Regulation Monitor Unit Rear Monitor Features & ControlsMonitor Unit Front Camera Unit Bottom Camera Features & ControlsCamera Unit Front Important Safety Instructions Battery Charge Remaining when not connected to a charger Battery Installation & SetupUsing AC/DC Adaptor Voice Activation Mode VOX Camera Operation & InstallationPower ON/OFF Infrared Night Vision Mode AutomaticLCD Off Monitor Operation & InstallationChannel Selection Mode Automatic Channel ScanTilt Screen To Disconnect the Paired CameraAudio/Video Output Link Brightness Control & Volume Control Troubleshooting Problem Normal SolutionsLimited Warranty Expand Your Monitoring Possibilities CAM-3 CAM-1