PYLE Audio PLCD29 owner manual Specification, General, CD Player, Radio

Page 10

SPECIFICATION

GENERAL

Power Supply Requirements	: DC 12 Volts, Negative Ground
Chassis Dimensions	: 178 (W) x 155 (D) x 50 (H)
Tone Controls
- Bass (at 100 Hz)	: + 10 dB / – 10 dB
- Treble (at 10 KHz)	: + 10 dB / – 10 dB
Maximum Output Power	: 4 x 40 Watts (max.)
Current Drain	: 5 Ampere (max.)

CD PLAYER

Signal to Noise Ratio	: More than 60 dB
Channel Separation	: More than 60 dB
Frequency Response	: 20 Hz - 20 KHz

RADIO

	FM
Frequency Coverage	: 87.5 to 107.9 MHz
IF	: 10.7 MHz
Sensitivity (S/N = 30 dB)	: 3 ∝V
Stereo Separation	: > 30 dB

	AM
Frequency Coverage	: 530 to 1710 KHz
IF	: 450 KHz
Sensitivity (S/N = 20 dB)	: 32 dBu

10

Image 10

Contents Mobile Audio System Contents DIN FRONT-MOUNT Method a InstallationInstalling the unit DIN FRONT/REAR-MOUNTDIN REAR-MOUNT Method B Removing the unitPrecautions when Handling Using the Detachable Front PanelTo Reinstall the Front Panel To Detach the Front PanelWiring Connection Main UnitOperation General OperationRadio Operation CD Operation CD Player SpecificationGeneral RadioTrouble Shooting Symptom Cause Solution88-C1280-11