OPERATION
Use VOLUME
(10) and VOLUME
(11)buttons to adjust the selected mode. When mode has not been adjusted for several seconds, display returns to normal radio or CD display.
| BA |
| TR |
| B |
| F |
| V- |
|
| (Bass) | (Treble) |
| (Balance) | (Fader) | (Volume) | ||||
|
|
|
|
|
|
|
|
|
|
|
•SELECT LISTENING MODE Press MOD button (13) to choose desired listening mode.
(e.g. radio mode to CD mode to AUX IN mode)
•LIQUID CRYSTAL DISPLAY Exhibit current frequency and activating functions on the display (14).
•AUXILIARY INPUT
The unit can be connected to a portable audio player through this jack (24).
•LED
When the front panel does not install on the main unit, the LED indicator (25) is flashing.
•RESET
Press RESET button (26) to
RADIO OPERATION
•SELECT BAND
Press BAND button (12) to change between three FM bands and two AM bands. Each band stores up to six preset stations.
FM1 
FM2 
FM3 
AM1 
AM2
•SELECT STATIONS
Press TRACK/TUNE button
(15) or TRACK/TUNE button
(16) shortly to tune the frequency downward or upward by step. Hold it for several seconds to seek the previous or next station.
•MONO/STEREO
Press MON button (4) to select monaural or stereo (Mono reception for radio stations). You can sometimes improve reception of distant stations by selecting mono operation.
•PRESET STATIONS
The six buttons (17) store and recall stations for each band.
Store a station:
Select a band (12) and station, then hold a preset button for several seconds.
Recall a station:
Select a band (12), press a preset button to select stored station.
•AUTOMATICALLY STORING & PROGRAM SCANNING
Automatically Storing
Press and hold AMS button (18) for several seconds to toggle automatically storing function. It starts searching next frequency and stores the station into the preset memory.
At the end of automatically storing operation, mode is changed to preset scan.
8