Develop and Practice a Plan of Escape

BASICS OF ESCAPE PLAN

oMake a floor plan indicating all doors and windows and at least two escape routes from each room. Second story windows may need a rope or chain ladder.

oHave a family meeting and discuss your escape plan, showing everyone what to do in case of fire. o Determine a place outside your home where all of you can meet if a fire occurs.

o Familiarize everyone with the sound of the smoke alarm and train them to leave your home when they hear the sound.

o Identify children's bedrooms with red stickers placed in the upper left corner of the windows. They are available from your local fire department.

o Practice a fire drill at least every six months. Practice allows you to test your plan before an emergency. You may not be able to reach your children. It is important they know what to do!

WHAT TO DO WHEN THE ALARM SOUNDS

oLeave immediately by your plan of escape. Every second counts, so don't waste time getting dressed or picking up valuables.

oIn leaving, don't open any inside door without first feeling its surface. If hot, or if you see smoke seeping through cracks, don't open that door! Instead, use your alternate exit. If

inside door is cool, place your shoulder against it, open it slightly and be ready to slam it shut if heat and smoke rush in.

oStay close to the floor if air is smoky. Breathe shallowly through a cloth, wet if possible. o Once outside, go to your selected meeting place and make sure everyone is there.

o Call the fire department from your neighbor's home – not from yours!

o Don't return to your home until fire officials say that it is all right to do so.

NATIONAL FIRE PROTECTION ASSOCIATION REQUIRED PROTECTION

For your information, the National Fire Protection Association's Standard 72, reads as follows: “11.5.1 One- and Two-Family Dwelling Units. 11.5.1.1 Smoke Detection. Where required

by applicable laws, codes, or standards for the specified occupancy, approved single- and multiple-station smoke alarms shall be installed as follows: (1) In all sleeping rooms. Exception: Smoke alarms shall not be required in sleeping rooms in existing one- and two-family dwelling units. (2) Outside of each separate sleeping area, in immediate vicinity of the sleeping rooms. (3) On each level of the dwelling unit, including basements. Exception: In existing one- and two-family dwelling units, approved smoke alarms powered by batteries are permitted.

“A.11.8.3 Are More Smoke Detectors Desirable? The required number of smoke detectors might not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke detectors. For this reason, it is recommended that the householder consider the use of additional smoke detectors for those areas for increased protection. The additional areas include the basement, bedrooms, dining room, furnace room, utility room, and hallways not protected by the required smoke detectors. The installation of smoke detectors in kitchens, attics (finished or unfinished), or garages is not normally recommended, as these locations occasionally experience conditions that can result in improper operation.”

The equipment should be installed using wiring methods in accordance with the National Fire ProtectionAssociation’s Standard 72, Chapter 11. (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269).

THIS PRODUCT IS LISTED TO UL STANDARD FOR SAFETY,

UL217 6TH, BY UNDERWRITERS LABORATORIES

Page 6

SS-785, SS-790 specifications

Universal SS-790 and SS-785 are advanced models of satellite communication systems that have garnered significant attention in the realm of telecommunications and data transfer. These systems are designed to provide seamless connectivity and enhanced performance, making them ideal for both commercial and governmental applications.

The Universal SS-790 is equipped with cutting-edge features aimed at enhancing user experience and operational efficiency. One of its standout features is its high throughput capability, which allows for rapid data transfer rates, ensuring reliable communication even in challenging environments. This model incorporates advanced modulation schemes and error correction technologies, such as DVB-S2X, to optimize bandwidth usage and improve overall signal quality.

In addition to its robust performance, the SS-790 is designed with flexibility in mind. It supports multiple frequency bands, including Ka-band, Ku-band, and C-band, catering to various operational needs and geographic requirements. This versatility enables users to adapt the system for different applications, from broadcasting to mobile communications.

On the other hand, the Universal SS-785 is more compact yet equally powerful, making it suitable for mobile and remote operations. This model emphasizes portability without compromising performance. One of its key characteristics is its ease of deployment, allowing users to set up satellite links quickly and efficiently. The SS-785 features automatic tracking capabilities, which ensures stable connections by adjusting the antenna's line of sight as satellites move.

Both models utilize advanced technologies such as software-defined networking (SDN), which enhances the ability to manage and optimize network performance dynamically. Through SDN integration, users can easily scale their operations and adapt to changing connectivity requirements.

Moreover, Universal’s commitment to security is evident in both SS-790 and SS-785, as they are equipped with encryption protocols to safeguard sensitive data transmissions. This added layer of security is crucial for organizations handling classified information or conducting sensitive operations.

In summary, Universal SS-790 and SS-785 represent the pinnacle of satellite communication technology, combining high-speed data transfer, flexibility, portability, and robust security features. Their innovative designs and capabilities make them invaluable tools for a wide array of applications, bridging the gap between remote locations and reliable connectivity. Whether for emergency response, broadcasting, or enterprise-level communications, these systems are setting new standards in the satellite communications landscape.