Using Your Low Profile Fan Heater

Before First Use

Remove any promotional material and packaging from the heater.

Unwind the cord to its full length and place the heater on a firm, level surface in a stable position. Visually inspect the air inlet and outlets to ensure there are no blockages.

Turning Your Heater On

Ensure the Heat Setting dial is turned to the OFF position.

Plug the cord into a 230V or 240V power point and switch on.

NOTE: Be sure the plug fits tightly as a loose fit will cause overheating and damage the plug.

NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your heater, when it is in use.

The Power-On Indicator, on the front of the heater, will illuminate when the heater is turned on.

MODE

2 1

Setting the Heating Mode

To control the heater, turn the Heat Setting dial as follows.

The Heat Setting dial has 4 modes: OFF - Shuts off both the heater and fan

FAN - For fan only operation 1 - Low heat setting (1200 watts)

2 - High heat setting (2400 watts)

Turn the heater off by turning the Heat Setting dial to the OFF position.

KFH270_IB_FA.indd 8

12/10/09 10:56 AM