Pioneer SX-LX03 HDMI Control Setting the HDMI options, Before using synchronization, Español

HDMI Control

Setting the HDMI options

You must adjust the settings of this unit as well as HDMI Control-compatible connected components in order to make use of the HDMI Control function. For more information see the operating instructions for each component.

Setting the HDMI Control mode

Choose whether to set this unit’s HDMI Control function On or Off. You will need to set it to Control On to use the HDMI Control function.

•When using a TV not manufactured by Pioneer, put this setting to Control Off.

	SETUP
1	TOOLS Press SETUP.
	ENTER
2	Select ‘HDMI Setup’ then press
ENTER.
	ENTER
3	Select ‘HDMI Ctrl’, then press
ENTER.
	ENTER
4	Adjust the setting then press

ENTER to confirm.

•Control On – Enables the HDMI Control function. When this unit’s power is turned off and you have a supported source begin playback while using the HDMI Control function, the audio and video output from the HDMI connection are output from the Flat Screen TV.

•Control Off – The HDMI Control is disabled. Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.

10

Before using synchronization	English
settings, you must:
Once you have finished all connections and
1 Put all components into standby mode.
2 Turn the power ON for all components,	Deutsch
with the power for the Flat Screen TV being
turned on last.
3 Choose the HDMI input to which the TV is
connected to this unit, and see if video
output from connected components displays	Français
properly on the screen or not.
Synchronized amp mode
Synchronized amp mode begins once you	Italiano
carry out an operation for the Flat Screen TV.
For more information, see the operating
instructions of your Flat Screen TV.
Synchronized amp mode operations	Nederlands
The synchronized amp mode can be used to
perform the following operations when using
the iPod function, or when the HDMI cable is
used to connect an external component:
• Displays on the Flat Screen TV when you
mute or adjust the volume of this unit.	Español
• The input of this unit is automatically
changed when playback occurs on a
connected component.
• Even if you change this unit’s input to a
device that is not connected by HDMI, the
synchronized amp mode remains in effect.
Canceling synchronized amp mode
If you cancel synchronized amp mode while
connected via HDMI to a Flat Screen TV or
while you are watching a TV program, the
power for this unit is turned off.
However, the power remains ON when an input
other than HDMI is selected (including iPod
function).
	55

En