Pioneer SX-LX03 Getting Started, Speed Transmission setting, from the COMPONENT VIDEO output

03 Getting Started

•When HDMI is selected for Video or Audio, proceed to step 5.

•When Component Video is selected for Video, proceed to step 6.

•When S-Video/Videois selected for Video, proceed to step 7.

Setting item		Output terminal name
Video	HDMI	HDMI Output
	Component	Video Output	Component
	Video		Video
	S-Video/Video		S-Video
			Video
Audio	HDMI	HDMI Output
	Digital Audio	Digital Audio	Optical
		Output
	Analog Audio	Audio Output (2 ch)
		Audio Output (7.1 ch)

Caution

•When HDMI is selected for Video, no video signals are output from the COMPONENT VIDEO, S-VIDEOor VIDEO output terminals.

•When Component Video or S-Video/ Video is selected for Video, no video signals are output from the HDMI OUT terminal.

•The video and audio signals output from the set output terminals are output synchronously (lip synchronization).

•Linear PCM audio signals (2 channels) are output from all terminals other than the ones selected for Audio, regardless of the

audio format or the player’s settings.

	ENTER
5	Select and set the HDMI High-

Speed Transmission setting.

Use / to select, then press ENTER.

Setup Navigator

BD PLAYER

Select the HDMI Hi-speed transmission setting.

On Off

Normally select [On] (Recommended).

Select [Off] if the video or audio of HDMI-connected

was not output in the test output.

•When HDMI High-Speed Transmission is set to On, use the supplied HDMI cable or a High Speed HDMI™ cable. The picture and sound may not be output properly if any other HDMI cable (standard HDMI™ cable) is used.

•When HDMI is selected for Video, proceed to step 8.

•When Component Video is selected for Video, proceed to step 6.

•When S-Video/Videois selected for Video, proceed to step 7.

	ENTER
6		Select the output video resolution
from the COMPONENT VIDEO output
terminals.
Use / to select, then press ENTER.
			Setup Navigator
			BD PLAYER
		Select the output video resolution at the
			Component video terminal.
		If you select [Source Direct], the output
		resolution is determined according to the
		video format of the playing source.

For details on the resolution settings, see Switching the output video resolution on page 87.

84

En