Pioneer SX-LX03 manual 07Listening to the radio, Changing the noise cut mode, Memorizing stations

07Listening to the radio

Changing the noise cut mode

If you find that the AM sound quality is bad even after trying the above, you may be able to improve it using a different noise cut mode. Just choose the one that sounds best.

SETUP

1 TOOLS Press after tuning to an AM radio station.

ENTER
2	Select ‘Tuner Setup’ then press
ENTER.
ENTER
3	Choose ‘Noise Cut’ then press
ENTER.
ENTER
4	Select a Noise cut mode (1, 2 or 3)

then press ENTER.

Memorizing stations

This system can memorize up to 30 stations, stored in three banks, or classes (A, B and C) of 10 stations each.

1Tune to an FM or AM radio station. Select mono or auto-stereo reception (FM) or the Noise Cut mode (AM) as necessary. These settings are saved along with the preset.

T.EDIT

2	OUTPUT	Press T.EDIT.
	RESOLUTION
	CLASS
3	GALLERY	Press to select one of the three
	HOME MEDIA

classes, then press ST +/– to select the station preset you want.

You can also use the number buttons to select a preset.

4 ENTER Press ENTER.

After pressing ENTER, the preset class and number stop blinking and the system memorize station.

Listening to station presets

You will need to have some presets stored to do this.

CLASS

1 HOME MEDIA Press to select the class in which

GALLERY

the channel is stored.

Press repeatedly to cycle through classes A, B and C.

ST	ST
2	Select the station preset you
want.

•You can also use the number buttons on the remote control to recall the station preset.

40

En