Pioneer SX-LX03 Erasing the additional data from BD-ROMs, Switching the output video resolution

VIDEO

SELECT

Switching the video output terminal

Use the procedure below to switch the video output terminal. Switch between the digital output (HDMI OUT terminal) and the analog output (COMPONENT VIDEO, S-VIDEOor VIDEO output terminals).

SOUND

Caution

Getting Started

Erasing the additional data from BD-ROMs

When a BD-ROM is played, additional data may be stored in the player’s memory (local storage).

If the message indicating low memory (local storage) appears, erase the BDMV data.

Caution

•When the BDMV data is erased, all the data of secondary video (Picture-in-Picture), secondary audio, bookmark, etc. that has been stored is erased.

SETUP

1 TOOLS Display the Tools menu.

With no disc loaded, press the TOOLS button.

	BD PLAYER
	TOOLS		Output Video Resolution
			BDMV Data Erase
	ENTER
2		Select and set the item.

Use / to select BDMV Data Erase, then press ENTER.

	ENTER
3	Erase the data.

Use / to select Yes, then press ENTER.

Erases all of the data added from BDMV. Please wait a while.

OK to erase data?

Yes No

03

•It takes time to erase the BDMV data for a while. Do not unplug the power cord for about 10 seconds after performing the above procedure.

• Switch the terminal from which the video signals are output.

The video output terminal switches each time the button is pressed.

Caution

•The picture may not be displayed for a while when the video output terminal is switched.

•When the HDMI OUT terminal is selected, no video signals are output from the other video output terminals.

•When a video output terminal other than the HDMI OUT terminal is selected, no video signals are output from the HDMI OUT terminal. However, audio signals are output.

Switching the output video resolution

Use the procedure below to switch the output video resolution from the various video output terminals.

87

En