Pioneer SX-LX03 Other connections Connecting external antennas, About control out connections

Other connections

Connecting external antennas

For an external AM antenna, use 5 to 6 meters of vinyl-insulated wire and set up either indoors or outdoors. Leave the loop antenna connected.

For an external FM antenna, use a PAL connector to hook up an external FM antenna.

External AM antenna

Outdoor antenna

Indoor antenna

(vinyl-coated Wire)

(5 m to 6 m)	External
	FM antenna
AM Loop antenna

OPTICAL
1	AM
	LOOP
2	FM
	UNBAL
	75
DIGITAL IN	ANTENNA

PAL connector

About control out connections

Many Pioneer components support CONTROL connections, by which you can use the remote controls of any connected components by aiming them at the sensor of just one component.

When you use a remote control, the control signal is passed along the chain to the appropriate component.

If you choose to use this feature, you must make sure that you also have at least one set of HDMI or analog audio jacks connected to another component for grounding purposes.

•Using a cable with a mono mini-plug on either end, connect the CONTROL IN jack on another Pioneer component to the CONTROL OUT jack on the rear panel.

This will allow you to control the other component by pointing its remote at the front panel.

09

English Deutsch Français Italiano Nederlands Español

49

En