Pioneer SX-LX03 manual Additional information, Problem, Check, Remedy, ch terminals or DIGITAL

07 Additional information

Problem	Check	Remedy
Multi-channel sound	Is the AV receiver or amplifier,	Read the operating instructions of the connected AV
is not output.	etc. connected to the HDMI	receiver or amplifier and check the audio output settings of
	OUT terminal, the AUDIO OUT	AV receiver or amplifier.
	(7.1 ch) terminals or DIGITAL
	OUT (OPTICAL) terminal?
	Is Output Terminal Priority	Linear PCM (2-channel) audio signals are output from
	properly set?	output terminals other than the one set at Audio under
		Output Terminal Priority. Set Output Terminal Priority
		properly (page 119).
	Is the audio output of the	Read the operating instructions of the connected AV
	connected AV receiver or	receiver or amplifier and check the audio output settings of
	amplifier, etc., properly set?	AV receiver or amplifier.
	Is multi-channel sound	Use the menu screen or AUDIO to switch the disc’s sound
	selected?	to multi-channel.
	Is Audio Out set to audio	• Read the operating instructions of the connected AV
	formats supported by the	receiver or amplifier and check the supported audio formats.
	connected AV receiver or	• Set Audio Out properly (page 109).
	amplifier?
	Are Audio Output Mode and	• When the AV receiver or amplifier, etc., is connected to the
	Speaker Setup properly set?	AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to
		Multi-channel (page 110).
		• Set Speaker Setup properly (page 110).
Digital audio signals	Is Audio Out set to audio	• Read the operating instructions of the connected AV
are not output from	formats supported by the	receiver or amplifier and check the supported audio
the DIGITAL OUT	connected AV receiver or	formats.
(OPTICAL) terminals	amplifier?	• Set Audio Out properly (page 109).
(analog audio signals
are output).
Noise can be heard	Is the connected AV receiver or	If an AV receiver or amplifier that is not compatible with DTS
when outputting DTS	amplifier compatible with DTS	Digital Surround is connected to the DIGITAL OUT
Digital Surround	Digital Surround?	terminal, set DTS Out to DTS  PCM. Noise will be heard
signals.		if DTS Out is set to DTS (page 109).
192 kHz or 96 kHz		It is not possible to output 192 kHz or 96 kHz digital audio
digital audio signals		signals from this player’s DIGITAL OUT (OPTICAL)
cannot be output		terminals. The signals are automatically converted to under
from the DIGITAL		96 kHz for output.
OUT (OPTICAL)
terminals.

Secondary audio or interactive audio is not output.

Is HDMI Audio Out properly	Set HDMI Audio Out to PCM (page 111).
set?
Are Dolby Digital Out and DTS	Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS
Out properly set?	1 (page 109).

Sound is fast or slow. When an HDMI cable is connected, are audio signals being output from devices connected with cables other than HDMI cables?

When this player is connected by HDMI cable to a Pioneer AV receiver or amplifier compatible with the PQLS function via HDMI connection, the PQLS function is activated when playing a music CD (CD-DA). Because of this, the sound output from components other than the ones connected by HDMI cable may be fast or slow. If this happens, set PQLS to Off (page 111).

126

En