Pioneer SX-LX03 manual Additional information, Problem, Check, Remedy, Is HDMI Control set to On?

Additional information 07

Problem	Check	Remedy
Inputs of connected	Is HDMI Control set to On?	The inputs of the connected TV or this receiver may
TV and this receiver,		automatically switch to the player when playback starts on
switches		the player or the menu screen (Home Media Gallery, etc.) is
automatically.		displayed. If you do not want the inputs of the connected TV
		and/or this receiver to switch automatically, set HDMI
		Control to Off (page 111).

Player cannot be	Is an AV receiver or amplifier
operated with remote	connected to the CONTROL IN
control.	terminal on the player’s rear
	panel?

Operate with the remote control of the device connected to the CONTROL IN terminal.

	Are you operating the remote	Operate from within 7 m of the remote control sensor.
	control from a point too far away
	from the player?
	Are the batteries dead?	Replace the batteries (page 9).
Settings you have	• Have you disconnected the	If the power cord is disconnected or there is a power failure
made have been	power cord while the player’s	while the player’s power is on, the settings you have made
cleared.	power was on?	may be cleared. Always press  STANDBY/ON on the
	• Has there been a power	player’s front panel or  BD on the remote control and
	failure?	check that POWER OFF has turned off from the player’s
		front panel display before disconnecting the power cord. Be
		particularly careful when the power cord is connected to the
		AC outlet on another device because the player turns off in
		conjunction with the device. We recommend plugging the
		power cord into a wall outlet whenever possible.

After a disc is	Are there too many files
inserted, Loading	recorded on the disc?
stays displayed and
playback does not
start.

When a disc on which files are recorded is inserted, depending on the number of files recorded on the disc, loading may take several dozen minutes.

 is displayed in file		The characters that cannot be displayed on this player are
names, etc.		displayed in .
The DVD layer of BD	Is Hybrid Disc Playback	Set Hybrid Disc Playback to DVD (page 113).
and DVD hybrid discs	properly set?
cannot be played.
The CD layer of BD	Is Hybrid Disc Playback	Set Hybrid Disc Playback to CD (page 113).
and CD hybrid discs	properly set?
cannot be played.

The Hybrid Disc Is a disc set in the disc tray? Playback setting

cannot be changed (displayed in gray).

The Hybrid Disc Playback setting cannot be changed when a disc is set. Remove the disc, then change the setting.

BDMV/BDAV	Is a disc set in the disc tray?
Playback Priority
setting cannot be
changed (displayed in
gray).

The BDMV/BDAV Playback Priority setting cannot be changed when a disc is set. Remove the disc, then change the setting.

129

En