Pioneer SX-LX03 manual Connecting the other audio component, Connecting using audio cables

02 Player connections

The video signal can also be connected using a separately sold S-Video or component video cable.

Caution

•When connected to the TV using a component video cable (commercially available), video signals are not output with a resolution of 1080/50i, 1080/50p, 720/50p, 1080/24p or 1080/60p.

•Depending on the output video resolution setting, the picture may not be output (page 87).

•Video signals are output with a resolution of 576/50i or 480/60i when connected using a video cable (included) or an S-Video cable (commercially available).

•Connect the player’s video output directly to your TV.

This player supports analog copy protection technology. Therefore the picture may not be displayed properly if connected to a TV via a DVD recorder/video deck or when playing the player’s output material that is recorded by a DVD recorder/video deck. Furthermore, the picture may not be displayed properly due to the copy protection when the player is connected to a TV with a built-in video deck. For details, contact the manufacturer of your TV.

Connecting the other audio component

Connect to the other audio component in order to enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround. For instructions on connecting the TV and speakers to the audio component, refer to the operating instructions of audio component.

80

Note

•Make the settings in the Setup Navigator menu according to the type of cable connected (page 83).

•To output video signals from this player, connect using one of the following (not including when connected using an HDMI cable): a component video cable (commercially available), an S-Video cable (commercially available) or a video cable (included).

Connecting using audio cables

Caution

•For DTS-HD Master Audio and DTS-HD High Resolution Audio signals, the DTS Digital Surround signals are converted to linear PCM for output (page 121).

When connecting to a 7.1-channel compatible audio component – Connect using the included audio cable and 3 commercially available audio cables (diagram below).

When connecting to a 5.1-channel compatible audio component – Connect using the included audio cable and 2 commercially available audio cables (do not connect to the surround back left and right terminals).

•After connecting, set Audio Output Mode to Multi-channel(page 110).

En